Spine Surgery, The Affiliated Drum Town Hospital of Nanjing University Medical School, Nanjing 210008, China.
Eur Spine J. 2013 Jul;22(7):1683-9. doi: 10.1007/s00586-013-2734-4. Epub 2013 Mar 19.
To provide radiographic parameters for optimal placement of posterior second sacral alar iliac (S2AI) screw for instrumentation and fusion of scoliosis to the second sacral level in a Chinese population.
S2AI screw trajectories were mapped on three-dimensional computed tomography (3DCT) reconstructions of 60 normal adult pelvises. 1 mm inferior and 1 mm lateral to the S1 dorsal foramen were chosen as the entry point, and ideal S2AI screw trajectories were explored by rotating and cutting the 3D pelvis, ensuring that the trajectories were of maximum length and width. The directions and depth of these determined trajectories were then measured.
The ideal S2AI screw trajectories could be found in each pelvis. The left and right screw trajectory parameters for males were shown as follows: angulation was L 29.15 ± 8.60° vs. R 29.96 ± 8.28° (p = 0.286) caudally in the sagittal plane and L 36.49 ± 3.14° vs. R 37.16 ± 3.14° (p = 0.165) laterally in the transverse plane. The maximal and intrasacral lengths of trajectory were L 121.25 ± 8.33 vs. R 120.63 ± 7.54 mm (p = 0.460) and L 26.20 ± 3.31 vs. R 26.92 ± 4.76 mm (p = 0.268). The entry point was L 28.87 ± 3.33 vs. R 29.79 ± 3.55 mm (p = 0.186) lateral to the second sacral midline, and L 44.14 ± 11.87 vs. R 43.89 ± 12.53 mm (p = 0.687) underneath the skin. The trajectories for females were more caudal (L: 34.50 ± 6.56° vs. 29.15 ± 8.60°, p = 0.009; R: 35.72 ± 7.53° vs. 29.96 ± 8.28°, p = 0.007) in the sagittal plane, but the lateral angulation in the transverse plane showed no difference between genders (p > 0.05). The female iliac medullar cavities were obviously narrower than those of males (L: 14.76 ± 2.46 vs. 16.98 ± 3.52, p = 0.006; R: 14.94 ± 2.60 vs. 17.00 ± 2.81, p = 0.005). Although the average maximal length of trajectories for females were about 5 mm shorter than those of males, intrasacral length were equal to those of males. Furthermore, both the distance from entry point to the S2 midline and skin in the transverse plane showed no difference between genders.
The feasibility to insert S2AI screws to the sacrum and ilium in an Asian population along with the ideal entry angle and length of trajectory were identified for clinical practice.
为中国人种提供最佳的后路第二骶髂关节(S2AI)螺钉置钉位置的影像学参数,以便在脊柱侧凸的第二骶骨水平进行仪器固定和融合。
对 60 例正常成人骨盆的三维 CT(3DCT)重建进行 S2AI 螺钉轨迹测绘。选择 S1 背孔下 1mm 和外侧 1mm 作为进钉点,通过旋转和切割 3D 骨盆来探索理想的 S2AI 螺钉轨迹,确保轨迹具有最大的长度和宽度。然后测量这些确定的轨迹的方向和深度。
在每个骨盆中都可以找到理想的 S2AI 螺钉轨迹。男性的左右螺钉轨迹参数如下:矢状面的倾斜角分别为 L 29.15±8.60°对 R 29.96±8.28°(p=0.286),在横向平面的倾斜角分别为 L 36.49±3.14°对 R 37.16±3.14°(p=0.165)。轨迹的最大长度和骶骨内长度分别为 L 121.25±8.33 对 R 120.63±7.54mm(p=0.460)和 L 26.20±3.31 对 R 26.92±4.76mm(p=0.268)。进钉点分别位于 L 28.87±3.33 对 R 29.79±3.55mm(p=0.186),位于第二骶骨中线外侧,L 44.14±11.87 对 R 43.89±12.53mm(p=0.687),位于皮肤下。女性的轨迹更靠后(L:34.50±6.56°对 29.15±8.60°,p=0.009;R:35.72±7.53°对 29.96±8.28°,p=0.007),但在横向平面上的外侧倾斜角在性别之间没有差异(p>0.05)。女性的髂骨骨髓腔明显比男性狭窄(L:14.76±2.46 对 16.98±3.52,p=0.006;R:14.94±2.60 对 17.00±2.81,p=0.005)。尽管女性的最大轨迹长度平均比男性短约 5mm,但骶骨内长度与男性相等。此外,横向平面上进钉点到 S2 中线和皮肤的距离在性别之间没有差异。
为亚洲人种在骶骨和髂骨中插入 S2AI 螺钉提供了可行性,并确定了理想的进钉角度和轨迹长度,以便于临床实践。