Suppr超能文献

用铒钇铝石榴石激光快速去除多晶陶瓷正畸托槽:一项体外研究。

Rapid debonding of polycrystalline ceramic orthodontic brackets with an Er:YAG laser: an in vitro study.

作者信息

Mundethu Ambili Roselina, Gutknecht Norbert, Franzen Rene

机构信息

AALZ Aachen Dental Laser Center, Pauwelsstr. 17, 52074, Aachen, Germany.

出版信息

Lasers Med Sci. 2014 Sep;29(5):1551-6. doi: 10.1007/s10103-013-1274-9. Epub 2013 Mar 24.

Abstract

The usefulness of erbium-doped yttrium aluminum garnet laser irradiation for debonding ceramic brackets is assessed using a single laser pulse. Damon Clear brackets were chosen for their 85% transmission of 2.94 μm radiation and were bonded to 20 human third molars using the Blugloo adhesive system. Laser parameters comprised of 600 mJ pulse energy with 800 μs duration, 1.3 mm fiber tip. Light microscopy was used to assess Adhesive Remnant Index (ARI) scores, and scanning electron microscope (SEM) images were taken of the cross-section of the enamel-adhesive interface. Nineteen brackets (95%) were successfully debonded with a single laser pulse, while one bracket (5%) required eight pulses for debonding. For all teeth, the SEM analysis showed no signs of damage to the enamel, and ARI scores of three were observed, supporting the result that the laser effect is confined in the adhesive. The presented laser parameters are able to rapidly debond suitable brackets. The debonding mechanism was concluded to be thermomechanical ablation for single pulse debonding.

摘要

使用单激光脉冲评估掺铒钇铝石榴石激光照射用于去除陶瓷托槽的有效性。选择戴蒙Clear托槽是因为其对2.94μm辐射的透过率为85%,并使用Blugloo粘结系统将其粘结到20颗人类第三磨牙上。激光参数包括600 mJ的脉冲能量、800μs的持续时间、1.3 mm的光纤尖端。使用光学显微镜评估粘结剂残留指数(ARI)评分,并拍摄釉质-粘结剂界面横截面的扫描电子显微镜(SEM)图像。19个托槽(95%)通过单激光脉冲成功去除,而1个托槽(5%)需要8个脉冲才能去除。对于所有牙齿,SEM分析显示釉质无损伤迹象,观察到ARI评分为3分,支持激光效应局限于粘结剂的结果。所呈现的激光参数能够快速去除合适的托槽。得出单脉冲去除的脱粘机制为热机械消融。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验