Department of Circulation and Medical Imaging, Norwegian University of Science and Technology, Trondheim, Norway.
IEEE Trans Ultrason Ferroelectr Freq Control. 2013 Apr;60(4):727-38. doi: 10.1109/TUFFC.2013.2621.
A quantitative angle-independent 2-D modality for flow and tissue imaging based on multi-angle plane wave acquisition was evaluated. Simulations of realistic flow in a carotid artery bifurcation were used to assess the accuracy of the vector Doppler (VD) technique. Reduction in root mean square deviation from 27 cm/s to 6 cm/s and 7 cm/s to 2 cm/s was found for the lateral (vx) and axial (vz) velocity components, respectively, when the ensemble size was increased from 8 to 50. Simulations of a Couette flow phantom (vmax = 2.7 cm/s) gave promising results for imaging of slowly moving tissue, with root mean square deviation of 4.4 mm/s and 1.6 mm/s for the x- and z-components, respectively. A packet acquisition scheme providing both B-mode and vector Doppler RF data was implemented on a research scanner, and beamforming and further post-processing was done offline. In vivo results of healthy volunteers were in accordance with simulations and gave promising results for flow and tissue vector velocity imaging. The technique was also tested in patients with carotid artery disease. Using the high ensemble vector Doppler technique, blood flow through stenoses and secondary flow patterns were better visualized than in ordinary color Doppler. Additionally, the full velocity spectrum could be obtained retrospectively for arbitrary points in the image.
一种基于多角度平面波采集的定量、角度独立的 2D 血流和组织成像方法得到了评估。使用颈动脉分叉处的真实流动模拟来评估向量多普勒(VD)技术的准确性。当集合大小从 8 增加到 50 时,横向(vx)和轴向(vz)速度分量的均方根偏差分别从 27cm/s 降低到 6cm/s 和 7cm/s。在 Couette 流动体模(vmax = 2.7cm/s)的模拟中,对于缓慢移动组织的成像给出了有希望的结果,x 和 z 分量的均方根偏差分别为 4.4mm/s 和 1.6mm/s。在研究型扫描仪上实现了一种同时提供 B 模式和向量多普勒 RF 数据的数据包采集方案,并在线下进行波束形成和进一步的后处理。健康志愿者的体内结果与模拟结果一致,为血流和组织向量速度成像提供了有希望的结果。该技术还在颈动脉疾病患者中进行了测试。使用高集合向量多普勒技术,可以比普通彩色多普勒更好地可视化狭窄处的血流和二次流动模式。此外,还可以回顾性地获得图像任意点的全速度谱。