Department of Food Science and Technology, National Nutrition and Food Technology Research Institute, Faculty of Nutrition Science and Food Technology, Shahid Beheshti University of Medical Sciences, Tehran, Iran.
J Sci Food Agric. 2013 Aug 15;93(10):2556-61. doi: 10.1002/jsfa.6076. Epub 2013 Apr 16.
Acrylamide as a possible carcinogen is known to form in heated carbohydrate-rich food such as potato chips. In this study, the effect of three potato varieties (Agria, Sante and Savalan) and two blanching conditions (75 °C for 9 min and 83 °C for 2.5 min) on the concentration of precursors and acrylamide reduction in potato chips was investigated.
Results revealed that potato variety and blanching time-temperature were important parameters for acrylamide formation in potato chips. Acrylamide content in Sante variety potatoes, which contained the highest amount of reducing sugars, was found to be the highest (8825 µg kg(-1)). However, Savalan, containing the highest asparagine concentration, showed the lowest amount of acrylamide due to its lower reducing sugar content. Blanching reduced acrylamide formation; it was more efficient at 75 °C for 9 min, with an average reduction of 74%. The effect of three frying temperatures (170, 180 and 190 °C) on acrylamide formation was also studied just for the Agria potato variety. Increasing frying temperature led to a significant increase in acrylamide formation.
Potato variety and processing conditions were important parameters for acrylamide formation in potato chips. The combination of a suitable variety and appropriate processing conditions could considerably reduce acrylamide content.
丙烯酰胺作为一种可能的致癌物质,已知会在富含碳水化合物的加热食品中形成,例如薯片。在这项研究中,研究了三种土豆品种(Agria、Sante 和 Savalan)和两种漂烫条件(75°C 漂烫 9 分钟和 83°C 漂烫 2.5 分钟)对薯片前体物浓度和丙烯酰胺减少的影响。
结果表明,土豆品种和漂烫时间-温度是薯片形成丙烯酰胺的重要参数。在含有还原糖含量最高的 Sante 品种土豆中,丙烯酰胺含量最高(8825μg/kg)。然而,由于还原糖含量较低,含有最高天门冬酰胺浓度的 Savalan 显示出最低的丙烯酰胺含量。漂烫可以减少丙烯酰胺的形成,在 75°C 漂烫 9 分钟时效率更高,平均减少了 74%。还研究了三种油炸温度(170、180 和 190°C)对丙烯酰胺形成的影响,仅针对 Agria 土豆品种。油炸温度的升高导致丙烯酰胺的形成显著增加。
土豆品种和加工条件是薯片形成丙烯酰胺的重要参数。合适的品种和适当的加工条件的结合可以大大降低丙烯酰胺的含量。