Zhao Liu-Jun, Xu Rong-Ming, Hua Qun, Ma Wei-Hu, Jiang Wei-Yu, Zhu Yan-Zhao
Department of Spinal Surgery, the 6th Hospital of Ningbo, Ningbo 315040, Zhejiang, China.
Zhongguo Gu Shang. 2012 Dec;25(12):1030-5.
To explore the best entry point and trajectory of anterior cervical screw in the cervical screw by radiological studies, and provide reference for clincal application.
From January 2008 to December 2010,50 patients were scanned by cervical CT and confirmed no obvious defect of lower cervical spine. Of them, 27 cases were males and 23 were females, ranged the age from 38 to 83 years ( mean 58.5 years). On horizontal axis, the camber angle of C3-C7 anterior lower cervical pedicle of vertebral arch axis (alpha) and distance between (axial length, AL) of anterior cervical pedicle axial line was measured from C3 to C7. Vertebral were divided into four areas, and from measured side of pedicle of vertebral began to record, orderly 1 to 4, the area of pedicle vertebral arch intersert into vertebral were recorded. On sagittal view, the head or tail angle (beta) and length (sagittal length, SL) of anterior cervical pedicle axial line was also measured from C3 to C7. Vertebral were divided into four areas, and from measured side of pedicle of vertebral began to record, orderly 1 to 4, the area of pedicle vertebral arch arch intersert into vertebral were recorded. The above data were statistically analyzed to find the best entry point and trajectory of anterior cervical screw in the cervical screw and insert pedicle screw.
The lateral angle of lower cervical spine was 38 degrees to 45 degrees on transverse plane, C3 to C5 increasing gradually, C5 to C7 decreasing. On sagittal view, C3,C4 pedicle were head tulting, C5 were basic level, C6,C7 were tail. C3 to C5 decreasing gradually, C5 to C7 increasing gradually. C3 to C7 in AL and SL increased gradually. On horizontal axis, the intersection of C3,C4 and C5 were in the second area, the number of C6 in the second and third area were the same, but C7 were in the third area. The intersection in the first and forth area were less. On sagittal view,the intersection of C3,C4 and C5 were in the first area,the number of C6 in third and forth area were less. Six pedicle screws of 3 cases were insert into lower cervical spine, and obtained good effects, no complications occurred.
The best entry point of C3,C4 and C5 were located in the center line and slightly to opposite vertebral body side and upper 1/4 area; C7 were located the vertebral body side and upper 2/4 area; C6 were located between them. The best insertion point were extraversion 38 degrees to 45 degrees, C3 to C5 increased graduallly, C5 to C7 decreased on horizontal axis; On sagittal view, C3,C4 for head 5 degrees to 10 degrees, C5 were basic level, C6,C7 for tail 5 degrees to 10 degrees. The anterior cervical pedicle screw for lower cervial spine is a good and feasible internal fixation.
通过影像学研究探讨颈椎前路螺钉的最佳进钉点和轨迹,为临床应用提供参考。
2008年1月至2010年12月,对50例经颈椎CT扫描证实下颈椎无明显病变的患者进行研究。其中男性27例,女性23例,年龄38~83岁(平均58.5岁)。在横轴位上,测量C3~C7下颈椎椎弓根轴线的外展角(α)及颈椎椎弓根轴线间的距离(轴向长度,AL),自C3至C7依次测量。将椎体分为4个区域,从测量的椎弓根侧开始记录,依次为1~4,记录椎弓根穿入椎体的区域。在矢状位上,测量C3~C7颈椎椎弓根轴线的头倾或尾倾角度(β)及长度(矢状长度,SL),同样将椎体分为4个区域,记录椎弓根穿入椎体的区域。对上述数据进行统计学分析,以确定颈椎前路螺钉的最佳进钉点和轨迹以及置入椎弓根螺钉。
下颈椎在横断面上的外展角为38°~45°,C3~C5逐渐增大,C5~C7逐渐减小。矢状位上,C3、C4椎弓根呈头倾,C5基本水平,C6、C7呈尾倾。C3~C5逐渐减小,C5~C7逐渐增大。C3~C7的AL和SL逐渐增大。横轴位上,C3、C4和C5的交点位于第2区域,C6在第2和第3区域的数量相同,但C7位于第3区域。第1和第4区域的交点较少。矢状位上,C3、C4和C5的交点位于第1区域,C6在第3和第4区域的数量较少。3例患者的6枚椎弓根螺钉置入下颈椎,效果良好,无并发症发生。
C3、C4和C5的最佳进钉点位于椎体中线并稍向对侧椎体侧及上1/4区域;C7位于椎体侧及上2/4区域;C6位于两者之间。最佳进钉角度在横轴位上为外展38°~45°,C3~C5逐渐增大,C5~C7逐渐减小;矢状位上,C3、C4头倾5°~10°,C5基本水平,C6、C7尾倾5°~10°。下颈椎前路椎弓根螺钉是一种良好且可行的内固定方法。