A dual flowing continuum approach to model denitrification experiments in porous media colonized by biofilms.

We present a modeling exercise of solute transport and biodegradation in a coarse porous medium widely colonized by a biofilm phase. Tracer tests in large laboratory columns using both conservative (fluorescein) and biodegradable (nitrate) solutes are simulated by means of a dual flowing continuum approach. The latter clearly distinguishes concentrations in a flowing porous phase from concentrations conveyed in the biofilm. With this conceptual setting, it becomes possible to simulate the sharp front of concentrations at early times and the flat tail of low concentrations at late times observed on the experimental breakthrough curves. Thanks to the separation of flow in two phases at different velocities, dispersion coefficients in both flowing phases keep reasonable values with some physical meaning. This is not the case with simpler models based on a single continuum (eventually concealing dead-ends), for which inferred dispersivity may reach the unphysical value of twice the size of the columns. We also show that the behavior of the dual flowing continuum is mainly controlled by the relative fractions of flow passing in each phase and the rate of mass transfer between phases. These parameters also condition the efficiency of nitrate degradation, the degradation rate in a well-seeded medium being a weakly sensitive parameter. Even though the concept of dual flowing continuum appears promising for simulating transport in complex porous media, its inversion onto experimental data really benefits from attempts with simpler models providing a rough pre-evaluation of parameters such as porosity and mean fluid velocity in the system.