Suppr超能文献

利用现代成像技术评估主动脉瘤的壁特性和壁强度。这是朝着对动脉瘤破裂风险进行个体化评估迈出的又一步。

Estimation of wall properties and wall strength of aortic aneurysms using modern imaging techniques. One more step towards a patient-specific assessment of aneurysm rupture risk.

机构信息

Vascular Surgery Department, University of Crete Medical School, Heraklion, Crete, Greece.

出版信息

Med Hypotheses. 2013 Aug;81(2):212-5. doi: 10.1016/j.mehy.2013.04.048. Epub 2013 May 25.

Abstract

Abdominal aortic aneurysmal disease is a major health problem with rupture representing its main complication accompanied by great mortality. Elective repair is currently performed with mortality rates <3%, based upon size or expansion rate, with a recommended threshold of 5.5 cm maximum diameter or >1cm/year enlargement. It is well established that even small AAAs without indication for surgical repair can experience rupture with catastrophic outcomes whereas larger aneurysms often remain intact for a long period. It is recognized, therefore, that the currently used, maximum diameter criterion can not accurately predict AAAs evolution. There is increasing interest in the role of patient-specific biomechanical profiling of AAA development and rupture. Biomechanically, rupture of a vessel occurs when intravascular forces exceed vessel wall structural endurance. Peak Wall Stress (PWS) has been previously shown to better identify AAAs prone to rupture than maximum diameter, but currently stress analysis takes into account several assumptions that influence results to a large extent and limit their use. Moreover stress represents only one of two determinants of rupture risk according to the biomechanical perspective. Wall strength and mechanical properties on the other hand cannot be assessed in vivo but only ex vivo through mechanical studies with mean values of these parameters taken into account for rupture risk estimations. New possibilities in the field of aortic imaging offer promising tools for the validation and advancement of stress analysis and the in vivo evaluation of AAAs' wall properties and wall strength. Documentation of aortic wall motion during cardiac cycle is now feasible through ECG-gated multi-detector CT imaging offering new possibilities towards an individualized method for rupture risk and expansion-rate predictions based on data acquired in vivo.

摘要

腹主动脉瘤疾病是一个重大的健康问题,破裂是其主要并发症,伴有很高的死亡率。目前,根据大小或扩张率,选择性修复的死亡率<3%,建议最大直径阈值为 5.5 厘米或每年扩大>1 厘米。众所周知,即使没有手术修复指征的小 AAA 也可能破裂,导致灾难性后果,而较大的动脉瘤通常在很长一段时间内保持完整。因此,人们认识到,目前使用的最大直径标准不能准确预测 AAA 的演变。越来越多的人关注患者特定的 AAA 发展和破裂的生物力学分析。从生物力学的角度来看,当血管内的力超过血管壁的结构耐力时,血管就会破裂。峰值壁应力(PWS)以前被证明比最大直径更能识别易破裂的 AAA,但目前的应力分析考虑了几个假设,这些假设在很大程度上影响了结果,并限制了它们的使用。此外,根据生物力学的观点,压力只是破裂风险的两个决定因素之一。另一方面,壁强度和机械性能不能在体内评估,只能通过机械研究在体外评估,这些参数的平均值用于破裂风险估计。主动脉成像领域的新可能性为应力分析的验证和发展以及 AAA 壁性能和壁强度的体内评估提供了有前途的工具。通过 ECG 门控多探测器 CT 成像,可以记录心脏周期期间的主动脉壁运动,为基于体内获得的数据进行破裂风险和扩张率预测的个体化方法提供了新的可能性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验