Department of Ophthalmology, Aarhus University Hospital, Aarhus, Denmark.
Invest Ophthalmol Vis Sci. 2013 Jul 26;54(7):5059-69. doi: 10.1167/iovs.12-10710.
We evaluated whether UVA-riboflavin collagen cross-linking (CXL) increases transverse stromal shear moduli ex vivo, whether the shear moduli are greater in the anterior compared to the posterior stroma, and whether the shear moduli are affected by CXL.
The resistance to unidirectional transverse shear of human (n = 18) and porcine (n = 42) corneas was measured in a custom engineered biaxial biomechanical setup at different hydrations. The corneas were separated into untreated, riboflavin solution-treated, and CXL-treated groups. The depth dependency of shear moduli within groups was assessed in femtosecond laser cut sheets. Dry weights were obtained for solids correction.
In porcine full-thickness buttons and 300 μm anterior sheets, a significantly increased unidirectional transverse shear modulus was detected in riboflavin-treated and CXL-treated groups compared to the respective untreated groups. There was no significant difference in shear modulus between riboflavin- and CXL-treated groups. In all groups, the shear moduli were greater in the anterior sheets compared to posterior sheets. Similar results were detected in human corneas.
A method for unidirectional transverse shear resistance measurement was developed. The shear moduli were greater in the anterior compared to the posterior sheets. Increase in shear moduli was observed in the riboflavin and CXL groups compared to the untreated group, indicating that the immediate effects of the riboflavin or CXL treatment may be due partly to ground substance/dextran-5-phosphate interaction.
我们评估了 UVA-核黄素胶原交联(CXL)是否会增加离体横向基质剪切模量,前基质与后基质相比剪切模量是否更大,以及 CXL 是否会影响剪切模量。
在定制的双轴生物力学设备上,以不同的含水量测量了人(n=18)和猪(n=42)角膜的单向横向剪切阻力。将角膜分为未经处理、核黄素溶液处理和 CXL 处理组。在飞秒激光切割片中评估组内的剪切模量深度依赖性。为固体校正获得干重。
在猪全厚度纽扣和 300μm 前片上,与相应的未处理组相比,核黄素处理和 CXL 处理组的单向横向剪切模量显著增加。核黄素处理组和 CXL 处理组之间的剪切模量没有差异。在前片和后片中,所有组的剪切模量在前片中均大于后片中。在人眼角膜中也检测到了类似的结果。
开发了一种用于测量单向横向抗剪阻力的方法。前片中的剪切模量大于后片中的剪切模量。与未处理组相比,核黄素组和 CXL 组的剪切模量增加,表明核黄素或 CXL 处理的即时效果可能部分归因于基质/葡聚糖-5-磷酸的相互作用。