Suppr超能文献

用于牙科应用的抛光与上釉二硅酸锂陶瓷的软组织粘附性

Soft tissue adhesion of polished versus glazed lithium disilicate ceramic for dental applications.

作者信息

Brunot-Gohin C, Duval J-L, Azogui E-E, Jannetta R, Pezron I, Laurent-Maquin D, Gangloff S C, Egles C

机构信息

Laboratoire BioMécanique et BioIngénierie (BMBI), UMR CNRS 7338, Université de Technologie de Compiègne, Centre de Recherches de Royallieu, BP 20529, Rue Personne de Roberval, 60205 Compiègne Cedex, France.

出版信息

Dent Mater. 2013 Sep;29(9):e205-12. doi: 10.1016/j.dental.2013.05.004. Epub 2013 Jun 24.

Abstract

OBJECTIVE

Ceramics are widely used materials for prosthesis, especially in dental fields. Despite multiple biomedical applications, little is known about ceramic surface modifications and the resulting cell behavior at its contact. The aim of this study is to evaluate the biological response of polished versus glazed surface treatments on lithium disilicate dental ceramic.

METHODS

We studied a lithium disilicate ceramic (IPS e.max(®) Press, Ivoclar Vivadent) with 3 different surface treatments: raw surface treatment, hand polished surface treatment, and glazed surface treatment (control samples are Thermanox(®), Nunc). In order to evaluate the possible modulation of cell response at the surface of ceramic, we compared polished versus glazed ceramics using an organotypic culture model of chicken epithelium.

RESULTS

Our results show that the surface roughness is not modified as demonstrated by equivalent Ra measurements. On the contrary, the contact angle θ in water is very different between polished (84°) and glazed (33°) samples. The culture of epithelial tissues allowed a very precise assessment of histocompatibility of these interfaces and showed that polished samples increased cell adhesion and proliferation as compared to glazed samples.

SIGNIFICANCE

Lithium disilicate polished ceramic provided better adhesion and proliferation than lithium disilicate glazed ceramic. Taken together, our results demonstrate for the first time, how it is possible to use simple surface modifications to finely modulate the adhesion of tissues. Our results will help dental surgeons to choose the most appropriate surface treatment for a specific clinical application, in particular for the ceramic implant collar.

摘要

目的

陶瓷是广泛用于假体的材料,尤其是在牙科领域。尽管有多种生物医学应用,但对于陶瓷表面改性及其接触时产生的细胞行为知之甚少。本研究的目的是评估锂二硅酸盐牙科陶瓷的抛光与釉面处理的生物反应。

方法

我们研究了一种锂二硅酸盐陶瓷(IPS e.max(®) Press,义获嘉伟瓦登特公司),采用3种不同的表面处理:原始表面处理、手工抛光表面处理和釉面处理(对照样品为Thermanox(®),安进公司)。为了评估陶瓷表面细胞反应的可能调节,我们使用鸡上皮组织的器官型培养模型比较了抛光陶瓷与釉面陶瓷。

结果

我们的结果表明,如等效粗糙度测量所示,表面粗糙度没有改变。相反,抛光(84°)和釉面(33°)样品在水中的接触角θ有很大差异。上皮组织培养能够非常精确地评估这些界面的组织相容性,结果表明,与釉面样品相比,抛光样品增加了细胞粘附和增殖。

意义

锂二硅酸盐抛光陶瓷比锂二硅酸盐釉面陶瓷具有更好的粘附性和增殖性。综上所述,我们的结果首次证明了如何使用简单的表面改性来精细调节组织的粘附。我们的结果将有助于牙科外科医生为特定的临床应用选择最合适的表面处理,特别是对于陶瓷种植体颈部。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验