Department of Anesthesiology and Critical Care Medicine, Johns Hopkins University, School of Medicine, Baltimore, Maryland, USA.
Anesthesiology. 2013 Aug;119(2):422-32. doi: 10.1097/ALN.0b013e31829bd9e2.
Spinal cord stimulation (SCS) is a useful neuromodulatory technique for treatment of certain neuropathic pain conditions. However, the optimal stimulation parameters remain unclear.
In rats after L5 spinal nerve ligation, the authors compared the inhibitory effects on mechanical hypersensitivity from bipolar SCS of different intensities (20, 40, and 80% motor threshold) and frequencies (50, 1 kHz, and 10 kHz). The authors then compared the effects of 1 and 50 Hz dorsal column stimulation at high- and low-stimulus intensities on conduction properties of afferent Aα/β-fibers and spinal wide-dynamic-range neuronal excitability.
Three consecutive daily SCS at different frequencies progressively inhibited mechanical hypersensitivity in an intensity-dependent manner. At 80% motor threshold, the ipsilateral paw withdrawal threshold (% preinjury) increased significantly from pre-SCS measures, beginning with the first day of SCS at the frequencies of 1 kHz (50.2 ± 5.7% from 23.9 ± 2.6%, n = 19, mean ± SEM) and 10 kHz (50.8 ± 4.4% from 27.9 ± 2.3%, n = 17), whereas it was significantly increased beginning on the second day in the 50 Hz group (38.9 ± 4.6% from 23.8 ± 2.1%, n = 17). At high intensity, both 1 and 50 Hz dorsal column stimulation reduced Aα/β-compound action potential size recorded at the sciatic nerve, but only 1 kHz stimulation was partially effective at the lower intensity. The number of actions potentials in C-fiber component of wide-dynamic-range neuronal response to windup-inducing stimulation was significantly decreased after 50 Hz (147.4 ± 23.6 from 228.1 ± 39.0, n = 13), but not 1 kHz (n = 15), dorsal column stimulation.
Kilohertz SCS attenuated mechanical hypersensitivity in a time course and amplitude that differed from conventional 50 Hz SCS, and may involve different peripheral and spinal segmental mechanisms.
脊髓刺激(SCS)是一种用于治疗某些神经性疼痛疾病的有用的神经调节技术。然而,最佳的刺激参数仍不清楚。
在 L5 脊神经结扎后的大鼠中,作者比较了不同强度(20%、40%和 80%运动阈值)和频率(50Hz、1kHz 和 10kHz)的双极 SCS 对机械性超敏反应的抑制作用。作者还比较了高频和低频刺激强度下 1Hz 和 50Hz 背柱刺激对传入 Aα/β-纤维的传导特性和脊髓宽动态范围神经元兴奋性的影响。
不同频率的连续 3 天 SCS 以强度依赖性方式逐渐抑制机械性超敏反应。在 80%运动阈值时,与 SCS 前测量相比,同侧爪回缩阈值(%损伤前)在第一天 SCS 时开始显著增加,在 1kHz(从 23.9±2.6%增加到 50.2±5.7%,n=19,平均值±SEM)和 10kHz(从 27.9±2.3%增加到 50.8±4.4%,n=17)的频率下开始显著增加,而在 50Hz 组中,从第二天开始显著增加(从 23.8±2.1%增加到 38.9±4.6%,n=17)。在高强度下,1Hz 和 50Hz 背柱刺激均降低了坐骨神经记录的 Aα/β-复合动作电位的大小,但只有 1kHz 刺激在较低强度时部分有效。对诱发刺激的风动反应的宽动态范围神经元 C 纤维成分中的动作电位数量在 50Hz 刺激后显著减少(从 228.1±39.0 减少到 147.4±23.6,n=13),但在 1kHz 刺激(n=15)时没有减少。
千赫兹 SCS 以与传统 50Hz SCS 不同的时间进程和幅度减弱机械性超敏反应,可能涉及不同的外周和脊髓节段机制。