Laboratory for Percutaneous Surgery, School of Computing, Queen's University, 557 Goodwin Hall, Kingston, ON, K7M2N8, Canada,
Clin Orthop Relat Res. 2013 Dec;471(12):4047-55. doi: 10.1007/s11999-013-3239-5. Epub 2013 Aug 17.
Computerized navigation improves the accuracy of minimally invasive pedicle screw placement during spine surgery. Such navigation, however, exposes both the patient and the staff to radiation during surgery. To avoid intraoperative exposure to radiation, tracked ultrasound snapshots-ultrasound image frames coupled with corresponding spatial positions-could be used to map preoperatively defined screw plans into the intraoperative coordinate frame. The feasibility of such an approach, however, has not yet been investigated.
QUESTIONS/PURPOSES: Are there vertebral landmarks that can be identified using tracked ultrasound snapshots? Can tracked ultrasound snapshots allow preoperative pedicle screw plans to be accurately mapped--compared with CT-derived pedicle screw plans--into the intraoperative coordinate frame in a simulated setting?
Ultrasound visibility of registration landmarks was checked on volunteers and phantoms. An ultrasound machine with integrated electromagnetic tracking was used for tracked ultrasound acquisition. Registration was performed using 3D Slicer open-source software (www.slicer.org). Two artificial lumbar spine phantoms were used to evaluate registration accuracy of pedicle screw plans using tracked ultrasound snapshots. Registration accuracy was determined by comparing the ultrasound-derived plans with the CT-derived plans.
The four articular processes proved to be identifiable using tracked ultrasound snapshots. Pedicle screw plans were registered to the intraoperative coordinate system using landmarks. The registrations were sufficiently accurate in that none of the registered screw plans intersected the pedicle walls. Registered screw plan positions had an error less than 1.28 ± 1.37 mm (average ± SD) in each direction and an angle difference less than 1.92° ± 1.95° around each axis relative to the CT-derived positions.
Registration landmarks could be located using tracked ultrasound snapshots and permitted accurate mapping of pedicle screw plans to the intraoperative coordinate frame in a simulated setting.
Tracked ultrasound may allow accurate computer-navigated pedicle screw placement while avoiding ionizing radiation in the operating room; however, further studies that compare this approach with other navigation techniques are needed to confirm the practical use of this new approach.
计算机导航可提高脊柱微创手术中经皮椎弓根螺钉放置的准确性。然而,这种导航会使患者和医务人员在手术过程中暴露在辐射下。为了避免术中辐射暴露,可以使用跟踪超声快照(将超声图像帧与相应的空间位置相结合)将术前定义的螺钉计划映射到术中坐标系中。然而,这种方法的可行性尚未得到研究。
问题/目的:是否可以使用跟踪超声快照识别椎骨标志?在模拟环境中,与 CT 衍生的椎弓根螺钉计划相比,跟踪超声快照是否可以准确地将术前椎弓根螺钉计划映射到术中坐标系中?
在志愿者和体模上检查了注册标志的超声可见性。使用具有集成电磁跟踪的超声机进行跟踪超声采集。使用 3D Slicer 开源软件(www.slicer.org)进行注册。使用两个人工腰椎体模评估使用跟踪超声快照进行椎弓根螺钉计划的注册准确性。通过比较超声衍生计划与 CT 衍生计划来确定注册准确性。
四个关节突被证明可以使用跟踪超声快照识别。使用标志将椎弓根螺钉计划注册到术中坐标系中。注册非常准确,没有一个注册的螺钉计划与椎弓根壁相交。注册的螺钉计划位置在每个方向上的误差小于 1.28±1.37mm(平均±SD),每个轴上的角度差小于 1.92°±1.95°相对于 CT 衍生位置。
可以使用跟踪超声快照定位注册标志,并在模拟环境中准确地将椎弓根螺钉计划映射到术中坐标系。
跟踪超声可能允许在手术室中进行准确的计算机导航椎弓根螺钉放置,同时避免电离辐射;然而,需要进一步的研究来比较这种方法与其他导航技术,以确认这种新方法的实际用途。