Guinee T P, O'Callaghan D J
Teagasc Food Research Centre Moorepark, Fermoy, Co. Cork, Ireland.
Teagasc Food Research Centre Moorepark, Fermoy, Co. Cork, Ireland.
J Dairy Sci. 2013;96(11):6830-6839. doi: 10.3168/jds.2013-6685. Epub 2013 Aug 29.
Scientific studies indicate that the intake of dietary fat and saturated fats in the modern Western diet is excessive and contributes adversely to health, lifestyle, and longevity. In response, manufacturers of cheese and processed cheese products (PCP) are pursuing the development of products with reduced fat contents. The present study investigated the effect of altering the fat level (13.8, 18.2, 22.7, 27.9, and 32.5 g/100g) in PCP on their chemical and physical properties. The PCP were formulated in triplicate to different fat levels using Cheddar cheese, skim milk cheese, anhydrous milk fat, emulsifying salt (ES), NaCl, and water. The formulations were designed to give fixed moisture (~53 g/100g) and ES:protein ratio (0.105). The resultant PCP, and their water-soluble extracts (WSE), prepared from a macerated blend of PCP and water at a weight ratio of 1:2, were analyzed at 4d. Reducing the fat content significantly increased the firmness of the unheated PCP and reduced the flowability and maximum loss tangent (fluidity) of the melted PCP. These changes coincided with increases in the levels of total protein, water-soluble protein, water-insoluble protein, and water-soluble Ca, and a decrease in the molar ratio of water-soluble Ca to soluble P. However, both water-soluble Ca and water-soluble protein decreased when expressed as percentages of total protein and total Ca, respectively, in the PCP. The high level of protein was a major factor contributing to the deterioration in physical properties as the fat content of PCP was reduced. Diluting the protein content or reducing the potential of the protein to aggregate, and thereby form structures that contribute to rigidity, may provide a means for improving quality of reduced-fat PCP by using natural cheese with lower intact casein content and lower calcium:casein ratio, for example, or by decreasing the ratio of sodium phosphate to sodium citrate-based ES.
科学研究表明,现代西方饮食中膳食脂肪和饱和脂肪的摄入量过高,对健康、生活方式和寿命产生不利影响。作为回应,奶酪和再制奶酪产品(PCP)制造商正在致力于开发脂肪含量降低的产品。本研究调查了改变PCP中的脂肪水平(13.8、18.2、22.7、27.9和32.5克/100克)对其化学和物理性质的影响。使用切达干酪、脱脂乳干酪、无水乳脂肪、乳化盐(ES)、氯化钠和水,将PCP一式三份配制成不同的脂肪水平。配方设计为使水分含量固定在约53克/100克,ES与蛋白质的比例为0.105。所得的PCP及其水溶性提取物(WSE),由PCP与水按重量比1:2混合制成的浸软混合物制备,在第4天进行分析。降低脂肪含量显著提高了未加热PCP的硬度,并降低了融化PCP的流动性和最大损耗角正切(流动性)。这些变化与总蛋白、水溶性蛋白、水不溶性蛋白和水溶性钙水平的增加以及水溶性钙与可溶性磷的摩尔比降低同时发生。然而,当分别以PCP中总蛋白和总钙的百分比表示时,水溶性钙和水溶性蛋白均降低。随着PCP脂肪含量的降低,高蛋白水平是导致物理性质恶化的主要因素。稀释蛋白质含量或降低蛋白质聚集的可能性,从而形成有助于硬度的结构,可能为通过使用完整酪蛋白含量较低和钙与酪蛋白比例较低的天然奶酪,例如,或通过降低基于磷酸钠与柠檬酸钠的ES的比例来提高低脂PCP的质量提供一种方法。