Suppr超能文献

塑料碎片对疏水性有机化学品的吸附能力。

Sorption capacity of plastic debris for hydrophobic organic chemicals.

机构信息

Division of Environmental Science and Ecological Engineering, Korea University, 145 Anam-ro, Seongbuk-gu, Seoul 136-701, Republic of Korea.

Oil and POPs Research Group, Korea Institute of Ocean Science and Technology, 391 Jangmok-myon, Geoje 656-834, Republic of Korea.

出版信息

Sci Total Environ. 2014 Feb 1;470-471:1545-52. doi: 10.1016/j.scitotenv.2013.08.023. Epub 2013 Sep 3.

Abstract

The occurrence of microplastics (MPs) in the ocean is an emerging world-wide concern. Due to high sorption capacity of plastics for hydrophobic organic chemicals (HOCs), sorption may play an important role in the transport processes of HOCs. However, sorption capacity of various plastic materials is rarely documented except in the case of those used for environmental sampling purposes. In this study, we measured partition coefficients between MPs and seawater (KMPsw) for 8 polycyclic aromatic hydrocarbons (PAHs), 4 hexachlorocyclohexanes (HCHs) and 2 chlorinated benzenes (CBs). Three surrogate polymers - polyethylene, polypropylene, and polystyrene - were used as model plastic debris because they are the major components of microplastic debris found. Due to the limited solubility of HOCs in seawater and their long equilibration time, a third-phase partitioning method was used for the determination of KMPsw. First, partition coefficients between polydimethylsiloxane (PDMS) and seawater (KPDMSsw) were measured. For the determination of KMPsw, the distribution of HOCs between PDMS or plastics and solvent mixture (methanol:water=8:2 (v/v)) was determined after apparent equilibrium up to 12 weeks. Plastic debris was prepared in a laboratory by physical crushing; the median longest dimension was 320-440 μm. Partition coefficients between polyethylene and seawater obtained using the third-phase equilibrium method agreed well with experimental partition coefficients between low-density polyethylene and water in the literature. The values of KMPsw were generally in the order of polystyrene, polyethylene, and polypropylene for most of the chemicals tested. The ranges of log KMPsw were 2.04-7.87, 2.18-7.00, and 2.63-7.52 for polyethylene, polypropylene, and polystyrene, respectively. The partition coefficients of plastic debris can be as high as other frequently used partition coefficients, such as 1-octanol-water partition coefficients (Kow) and log KMPsw showed good linear correlations with log Kow. High sorption capacity of microplastics implies the importance of MP-associated transport of HOCs in the marine environment.

摘要

微塑料(MPs)在海洋中的出现是一个全球性的新兴问题。由于塑料对疏水性有机化学品(HOCs)具有高吸附能力,因此吸附可能在 HOCs 的迁移过程中发挥重要作用。然而,除了用于环境采样目的的塑料材料外,很少有文献记录各种塑料材料的吸附能力。在这项研究中,我们测量了 8 种多环芳烃(PAHs)、4 种六氯环己烷(HCHs)和 2 种氯苯(CBs)在 MPs 与海水中的分配系数(KMPsw)。我们使用了三种替代聚合物——聚乙烯、聚丙烯和聚苯乙烯——作为模型塑料碎片,因为它们是在微塑料碎片中发现的主要成分。由于 HOCs 在海水中的溶解度有限且达到平衡所需的时间较长,因此我们使用第三相分配法来确定 KMPsw。首先,我们测量了聚二甲基硅氧烷(PDMS)与海水之间的分配系数(KPDMSsw)。为了确定 KMPsw,在 12 周内达到明显平衡后,测定了 HOCs 在 PDMS 或塑料与溶剂混合物(甲醇:水=8:2(v/v))之间的分配。实验室中通过物理破碎制备塑料碎片,最长中值尺寸为 320-440 μm。使用三相平衡法获得的聚乙烯与海水之间的分配系数与文献中低密度聚乙烯与水之间的实验分配系数吻合较好。对于大多数测试的化学品,KMPsw 的值通常按聚苯乙烯、聚乙烯和聚丙烯的顺序排列。聚乙烯、聚丙烯和聚苯乙烯的 KMPsw 值范围分别为 2.04-7.87、2.18-7.00 和 2.63-7.52。塑料碎片的分配系数可与其他常用的分配系数(如辛醇-水分配系数(Kow))一样高,log KMPsw 与 log Kow 呈良好的线性关系。微塑料的高吸附能力意味着 MPs 对 HOCs 在海洋环境中的迁移具有重要意义。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验