Suppr超能文献

影响隐形眼镜体外胆固醇沉积的因素。

Factors that influence in vitro cholesterol deposition on contact lenses.

作者信息

Walther Hendrik, Lorentz Holly, Heynen Miriam, Kay Lise, Jones Lyndon W

机构信息

*MSc †PhD, FAAO ‡MPS §PhD, FCOptom, FAAO Centre for Contact Lens Research, School of Optometry and Vision Science, University of Waterloo (HW, HL, MH, LK, LWJ) Waterloo, Ontario, Canada and Department of Chemical Engineering, McMaster University (HL), Hamilton, Ontario, Canada.

出版信息

Optom Vis Sci. 2013 Oct;90(10):1057-65. doi: 10.1097/OPX.0000000000000022.

Abstract

PURPOSE

The purpose of this study was to analyze the impact that incubation time, lipid concentration, and solution replenishment have on silicone hydrogel (SiHy) and conventional hydrogel (CH) contact lens cholesterol deposition via in vitro radiochemical experiments.

METHODS

Four SiHy (senofilcon A, lotrafilcon B, comfilcon A, balafilcon A) and two CH (etafilcon A and omafilcon A) contact lenses were incubated in an artificial tear solution (ATS) that contained major tear film proteins, lipids, salts, salts, and a trace amount of radioactive C-cholesterol. Lenses were incubated for various incubation times (1, 3, 7, 14, or 28 days), with three concentrations of lipid (0.5×, 1×, 2× tear film concentration) and with or without solution replenishment to assess each variable's impact on cholesterol deposition. After incubation, the lenses were extracted using 2:1 chloroform:methanol, extracts were analyzed in a beta counter and masses (micrograms per lens) were extrapolated from standard curves.

RESULTS

Within the SiHy materials, balafilcon A deposited the greatest amount of cholesterol (p < 0.001) and lotrafilcon B the lowest (p < 0.001). The CH lens materials showed significantly lower uptake amounts than any of the SiHy lens materials (p < 0.001). The uptake of cholesterol ranged from 0.01 ± 0.01 μg/lens to 3.22 ± 0.34 μg/lens for all lens materials. Kinetic uptake of cholesterol was shown to be continuous throughout the 28 days of incubation without plateau (p < 0.001), and varying the lipid concentration did impact the resulting cholesterol deposition (p < 0.001). Replenishing the ATS every other day also affected cholesterol deposition throughout the experiment. Overall, the deposition pattern was 2× > replenishing > 1× > 0.5×.

CONCLUSIONS

Overall, SiHy lenses deposit significantly more cholesterol than CH lens materials, and the mass of lipid deposited is dependent on the contact lens material, length of incubation, concentration of lipids in the ATS, and the replenishment of ATS.

摘要

目的

本研究旨在通过体外放射化学实验,分析孵育时间、脂质浓度和溶液补充对硅水凝胶(SiHy)和传统水凝胶(CH)隐形眼镜胆固醇沉积的影响。

方法

将四种硅水凝胶(senofilcon A、lotrafilcon B、comfilcon A、balafilcon A)和两种传统水凝胶(etafilcon A和omafilcon A)隐形眼镜置于含有主要泪膜蛋白、脂质、盐类以及微量放射性碳胆固醇的人工泪液溶液(ATS)中进行孵育。隐形眼镜分别孵育不同时间(1、3、7、14或28天),设置三种脂质浓度(0.5倍、1倍、2倍泪膜浓度),并评估有无溶液补充对胆固醇沉积的影响。孵育后,使用氯仿:甲醇为2:1的混合液提取隐形眼镜,提取物在β计数器中进行分析,并根据标准曲线推算出每片隐形眼镜的胆固醇质量(微克)。

结果

在硅水凝胶材料中,balafilcon A沉积的胆固醇量最多(p < 0.001),lotrafilcon B沉积的量最少(p < 0.001)。传统水凝胶隐形眼镜材料的摄取量显著低于任何一种硅水凝胶隐形眼镜材料(p < 0.001)。所有隐形眼镜材料的胆固醇摄取量在0.01±0.01μg/片至3.22±0.34μg/片之间。胆固醇的动力学摄取在整个28天的孵育过程中持续进行,无平台期(p < 0.001),改变脂质浓度确实会影响最终的胆固醇沉积(p < 0.001)。每隔一天补充一次人工泪液溶液在整个实验过程中也会影响胆固醇沉积。总体而言,沉积模式为2倍浓度>补充溶液>1倍浓度>0.5倍浓度。

结论

总体而言,硅水凝胶隐形眼镜沉积的胆固醇显著多于传统水凝胶隐形眼镜材料,沉积的脂质质量取决于隐形眼镜材料、孵育时间、人工泪液溶液中的脂质浓度以及人工泪液溶液的补充情况。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验