James L, Winkle College of Pharmacy, University of Cincinnati, Cincinnati, OH 45267, USA.
Nanoscale Res Lett. 2013 Oct 17;8(1):426. doi: 10.1186/1556-276X-8-426.
Magnetic nanoparticles that are currently explored for various biomedical applications exhibit a high propensity to minimize total surface energy through aggregation. This study introduces a unique, thermoresponsive nanocomposite design demonstrating substantial colloidal stability of superparamagnetic Fe3O4 nanoparticles (SPIONs) due to a surface-immobilized lipid layer. Lipid coating was accomplished in different buffer systems, pH 7.4, using an equimolar mixture of 1,2-dipalmitoyl-sn-glycero-3-phosphocholine (DPPC) and l-α-dipalmitoylphosphatidyl glycerol (DPPG). Particle size and zeta potential were measured by dynamic laser light scattering. Heating behavior within an alternating magnetic field was compared between the commercial MFG-1000 magnetic field generator at 7 mT (1 MHz) and an experimental, laboratory-made magnetic hyperthermia system at 16.6 mT (13.7 MHz). The results revealed that product quality of lipid-coated SPIONs was significantly dependent on the colloidal stability of uncoated SPIONs during the coating process. Greatest stability was achieved at 0.02 mg/mL in citrate buffer (mean diameter = 80.0 ± 1.7 nm; zeta potential = -47.1 ± 2.6 mV). Surface immobilization of an equimolar DPPC/DPPG layer effectively reduced the impact of buffer components on particle aggregation. Most stable suspensions of lipid-coated nanoparticles were obtained at 0.02 mg/mL in citrate buffer (mean diameter = 179.3 ± 13.9 nm; zeta potential = -19.1 ± 2.3 mV). The configuration of the magnetic field generator significantly affected the heating properties of fabricated SPIONs. Heating rates of uncoated nanoparticles were substantially dependent on buffer composition but less influenced by particle concentration. In contrast, thermal behavior of lipid-coated nanoparticles within an alternating magnetic field was less influenced by suspension vehicle but dramatically more sensitive to particle concentration. These results underline the advantages of lipid-coated SPIONs on colloidal stability without compromising magnetically induced hyperthermia properties. Since phospholipids are biocompatible, these unique lipid-coated Fe3O4 nanoparticles offer exciting opportunities as thermoresponsive drug delivery carriers for targeted, stimulus-induced therapeutic interventions. PACS: 7550Mw; 7575Cd; 8185Qr.
目前,用于各种生物医学应用的磁性纳米粒子通过聚集表现出极大地降低总表面能的倾向。本研究介绍了一种独特的、温敏纳米复合材料设计,由于表面固定的脂质层,展示了超顺磁 Fe3O4 纳米粒子(SPIONs)的显著胶体稳定性。脂质涂层在不同的缓冲体系中完成,pH 值为 7.4,使用 1,2-二棕榈酰-sn-甘油-3-磷酸胆碱(DPPC)和 l-α-二棕榈酰磷脂酰甘油(DPPG)的等摩尔混合物。通过动态激光光散射测量颗粒大小和 zeta 电位。在 7 mT(1 MHz)的商用 MFG-1000 磁场发生器和 16.6 mT(13.7 MHz)的实验性实验室制造的磁热疗系统之间比较了交变磁场中的加热行为。结果表明,脂质涂层 SPIONs 的产物质量在涂层过程中显著依赖于未涂层 SPIONs 的胶体稳定性。在柠檬酸盐缓冲液中以 0.02 mg/mL 达到最大稳定性(平均直径=80.0±1.7nm;zeta 电位=-47.1±2.6mV)。等摩尔 DPPC/DPPG 层的表面固定有效地减少了缓冲成分对颗粒聚集的影响。在柠檬酸盐缓冲液中以 0.02 mg/mL 获得最稳定的脂质涂层纳米粒子悬浮液(平均直径=179.3±13.9nm;zeta 电位=-19.1±2.3mV)。磁场发生器的配置显著影响所制备的 SPIONs 的加热特性。未涂层纳米粒子的加热速率主要取决于缓冲成分,但受颗粒浓度的影响较小。相比之下,交变磁场中脂质涂层纳米粒子的热行为受悬浮载体的影响较小,但对颗粒浓度的影响更为敏感。这些结果强调了脂质涂层 SPIONs 在胶体稳定性方面的优势,而不会影响磁诱导热疗性能。由于磷脂是生物相容的,这些独特的脂质涂层 Fe3O4 纳米粒子为作为热响应性药物载体提供了令人兴奋的机会,用于靶向、刺激诱导的治疗干预。 PACS: 7550Mw; 7575Cd; 8185Qr.