Suppr超能文献

基于磁分离的多功能无机-有机杂化纳米球用于快速和选择性检测混合硝芳烃中的 TNT 的荧光法。

Multifunctional inorganic-organic hybrid nanospheres for rapid and selective luminescence detection of TNT in mixed nitroaromatics via magnetic separation.

机构信息

State Key Laboratory of Chemical Resource Engineering, School of Science, Beijing University of Chemical Technology, Beijing 100029, China.

出版信息

Talanta. 2013 Nov 15;116:535-40. doi: 10.1016/j.talanta.2013.07.033. Epub 2013 Jul 20.

Abstract

Rapid, sensitive and selective detection of 2,4,6-trinitrotoluene (TNT) in aqueous solution differentiating from other nitroaromatics and independent of complicated instruments is in high demand for public safety and environmental monitoring. Despite of many methods for TNT detection, it is hard to differentiate TNT from 2,4,6-trinitrophenol (TNP) due to their highly similar structures and properties. In this work, via a simple and versatile method, LaF3ːCe(3+)-Tb(3+)and Fe3O4 nanoparticle-codoped multifunctional nanospheres were prepared through self-assembly of the building blocks. The luminescence of these nanocomposites was dramatically quenched via adding nitroaromatics into the aqueous solution. After the magnetic separation, however, the interference of other nitroaromatics including 2,4,6-trinitrophenol (TNP), 2,4-dinitrotoluene (DNT), and nitrobenzene (NB) was effectively overcome due to the removal of these coexisting nitroaromatics from the surface of nanocomposites. Due to the formation of TNT(-)-RCONH3(+), the TNT was attached to the surface of the nanocomposites and was quantitatively detected by the postexposure luminescence quenching. Meanwhile, the luminescence intensity is negatively proportional to the concentration of TNT in the range of 0.01-5.0 μg/mL with the 3σ limit of detection (LOD) of 10.2 ng/mL. Therefore, the as-developed method provides a novel strategy for rapid and selective detection of TNT in the mixture solution of nitroaromatics by postexposure luminescence quenching.

摘要

快速、灵敏和选择性地检测水溶液中的 2,4,6-三硝基甲苯(TNT),与其他硝基芳烃区分开来,且不依赖于复杂的仪器,这对于公共安全和环境监测是非常有必要的。尽管有许多 TNT 检测方法,但由于它们结构和性质非常相似,很难将 TNT 与 2,4,6-三硝基苯酚(TNP)区分开来。在这项工作中,通过一种简单而通用的方法,通过自组装构建块制备了 LaF3:Ce(3+)-Tb(3+)和 Fe3O4 纳米粒子共掺杂多功能纳米球。这些纳米复合材料的发光通过将硝基芳烃加入水溶液中而显著猝灭。然而,通过磁性分离后,由于这些共存的硝基芳烃从纳米复合材料表面被去除,其他硝基芳烃(包括 2,4,6-三硝基苯酚(TNP)、2,4-二硝基甲苯(DNT)和硝基苯(NB))的干扰被有效克服。由于形成了 TNT(-)-RCONH3(+),TNT 被附着到纳米复合材料的表面,并通过曝光后发光猝灭进行定量检测。同时,发光强度与 TNT 的浓度在 0.01-5.0 μg/mL 的范围内呈负相关,检测限(LOD)为 10.2 ng/mL。因此,所开发的方法通过曝光后发光猝灭为快速和选择性地检测硝基芳烃混合物溶液中的 TNT 提供了一种新策略。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验