Laser microprobe mass spectrometry of quaternary phosphonium salts: Direct versus matrix-assisted laser desorption.

The use of laser microprobe mass spectrometry (LMMS) for the structural characterization of thermolabile quaternary phosphonium salts has been evaluated. A comparison has been made between LM mass spectra obtained by direct analysis of "neat" organic salts and the corresponding "matrix-assisted" LM mass spectra. Main limitations of LMMS for the direct analysis of neat organic salts (i.e., no matrix) result from (1) formation of artifact ions that originate from thermal degradation and surface recombination reactions and (2) poor shot-to-shot reproducibility of the spectra. Dilution of the organic salts in a suitable, UV-absorbing matrix (e.g., nicotinic acid) significantly enhances the quality of the LM mass spectra. Improvements are: (1) an increase of the ion yield of preformed cations, (2) reduction or elimination of thermal decomposition and other deleterious surface reactions, and (3) a much better shot-to-shot spectral reproducibility. An interesting analytical feature is that these LM mass spectra, which contain only a few matrix peaks, can be obtained for subnanogram amounts of sample.The results also show that triphenylphosphonium salts with polycyclic aromatic substituents can be used as "molecular thermometers" to probe both the temperatures experienced by the sample molecules during the laser-induced desorption ionization process and the internal energies of the desorbed ion species. In this way, quaternary phosphonium salts can be used for evaluating whether improvements have been achieved by applying different sample treatments. Comparison of four different matrices (i.e., nicotinic acid, ammonium chloride, glycerol, and 3-nitrobenzylalcohol) indicates that the effectiveness of a matrix to reduce thermal degradation and to decrease the internal energies of the ions depends on the UV-absorption characteristics and the volatilization/sublimation temperature of the matrix material.