Clean Fuel Department, Korea Institute of Energy Research, Jeongeup, Jeonbuk 580-185, South Korea.
Biotechnol Biofuels. 2013 Nov 29;6(1):170. doi: 10.1186/1754-6834-6-170.
Empty fruit bunch (EFB) has many advantages, including its abundance, the fact that it does not require collection, and its year-round availability as a feedstock for bioethanol production. But before the significant costs incurred in ethanol production from lignocellulosic biomass can be reduced, an efficient sugar fractionation technology has to be developed. To that end, in the present study, an NaOH-catalyzed steam pretreatment process was applied in order to produce ethanol from EFB more efficiently.
The EFB pretreatment conditions were optimized by application of certain pretreatment variables such as, the NaOH concentrations in the soaking step and, in the steam step, the temperature and time. The optimal conditions were determined by response surface methodology (RSM) to be 3% NaOH for soaking and 160°C, 11 min 20 sec for steam pretreatment. Under these conditions, the overall glucan recovery and enzymatic digestibility were both high: the glucan and xylan yields were 93% and 78%, respectively, and the enzymatic digestibility was 88.8% for 72 h using 40 FPU/g glucan. After simultaneous saccharification and fermentation (SSF), the maximum ethanol yield and concentration were 0.88 and 29.4 g/l respectively.
Delignification (>85%) of EFB was an important factor in enzymatic hydrolysis using CTec2. NaOH-catalyzed steam pretreatment, which can remove lignin efficiently and requires only a short reaction time, was proven to be an effective pretreatment technology for EFB. The ethanol yield obtained by SSF, the key parameter determining the economics of ethanol, was 18% (w/w), equivalent to 88% of the theoretical maximum yield, which is a better result than have been reported in the relevant previous studies.
空果串 (EFB) 有许多优点,包括其丰富、无需收集以及全年可作为生物乙醇生产原料的可用性。但在从木质纤维素生物质中生产乙醇的显著成本降低之前,必须开发一种高效的糖分离技术。为此,在本研究中,应用 NaOH 催化蒸汽预处理工艺来更有效地从 EFB 生产乙醇。
通过应用某些预处理变量,如浸泡步骤中的 NaOH 浓度以及蒸汽步骤中的温度和时间,对 EFB 预处理条件进行了优化。通过响应面法 (RSM) 确定最佳条件为浸泡 3% NaOH 和蒸汽预处理 160°C、11 分钟 20 秒。在这些条件下,整体葡聚糖回收率和酶解率都很高:葡聚糖和木聚糖的收率分别为 93%和 78%,使用 40 FPU/g 葡聚糖进行 72 小时酶解的酶解率为 88.8%。在同步糖化发酵 (SSF) 后,最大乙醇产量和浓度分别为 0.88 和 29.4 g/l。
EFB 的脱木质素(>85%)是使用 CTec2 进行酶水解的重要因素。NaOH 催化蒸汽预处理可以有效地去除木质素,并且反应时间短,被证明是一种有效的 EFB 预处理技术。通过 SSF 获得的乙醇产率(决定乙醇经济可行性的关键参数)为 18%(w/w),相当于理论最大产率的 88%,这比相关先前研究中报道的结果更好。