Suppr超能文献

因废用导致骨矿物质密度分布改变而引发胫骨骨折风险的预测:一项有限元研究

Prediction of risk of fracture in the tibia due to altered bone mineral density distribution resulting from disuse: a finite element study.

作者信息

Gislason Magnus K, Coupaud Sylvie, Sasagawa Keisuke, Tanabe Yuji, Purcell Mariel, Allan David B, Tanner K Elizabeth

机构信息

Departments of Mechanical and Biomedical Engineering, University of Strathclyde, Glasgow, UK.

出版信息

Proc Inst Mech Eng H. 2014 Feb;228(2):165-74. doi: 10.1177/0954411914522438. Epub 2014 Feb 6.

Abstract

The disuse-related bone loss that results from immobilisation following injury shares characteristics with osteoporosis in post-menopausal women and the aged, with decreases in bone mineral density leading to weakening of the bone and increased risk of fracture. The aim of this study was to use the finite element method to: (i) calculate the mechanical response of the tibia under mechanical load and (ii) estimate of the risk of fracture; comparing between two groups, an able-bodied group and spinal cord injury patients group suffering from varying degrees of bone loss. The tibiae of eight male subjects with chronic spinal cord injury and those of four able-bodied age-matched controls were scanned using multi-slice peripheral quantitative computed tomography. Images were used to develop full three-dimensional models of the tibiae in Mimics (Materialise) and exported into Abaqus (Simulia) for calculation of stress distribution and fracture risk in response to specified loading conditions - compression, bending and torsion. The percentage of elements that exceeded a calculated value of the ultimate stress provided an estimate of the risk of fracture for each subject, which differed between spinal cord injury subjects and their controls. The differences in bone mineral density distribution along the tibia in different subjects resulted in different regions of the bone being at high risk of fracture under set loading conditions, illustrating the benefit of creating individual material distribution models. A predictive tool can be developed based on these models, to enable clinicians to estimate the amount of loading that can be safely allowed onto the skeletal frame of individual patients who suffer from extensive musculoskeletal degeneration (including spinal cord injury, multiple sclerosis and the ageing population). The ultimate aim is to reduce fracture occurrence in these vulnerable groups.

摘要

因受伤后固定不动而导致的废用性骨质流失,与绝经后女性和老年人的骨质疏松具有共同特征,骨矿物质密度降低会导致骨骼变弱,骨折风险增加。本研究的目的是使用有限元方法:(i)计算胫骨在机械负荷下的力学响应,以及(ii)估计骨折风险;比较两组,一组是身体健全组,另一组是患有不同程度骨质流失的脊髓损伤患者组。使用多层外周定量计算机断层扫描对八名慢性脊髓损伤男性受试者的胫骨和四名年龄匹配的身体健全对照者的胫骨进行扫描。图像用于在Mimics(Materialise)中建立胫骨的完整三维模型,并导出到Abaqus(Simulia)中,以计算在特定加载条件(压缩、弯曲和扭转)下的应力分布和骨折风险。超过计算出的极限应力值的单元百分比提供了每个受试者骨折风险的估计值,脊髓损伤受试者与其对照者之间存在差异。不同受试者胫骨沿骨矿物质密度分布的差异导致在设定加载条件下骨的不同区域处于高骨折风险,这说明了创建个体材料分布模型的益处。可以基于这些模型开发一种预测工具,使临床医生能够估计对于患有广泛肌肉骨骼退化(包括脊髓损伤、多发性硬化症和老年人群)的个体患者的骨骼框架可以安全承受的负荷量。最终目标是减少这些弱势群体中的骨折发生率。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验