Suppr超能文献

手术治疗的成人脊柱畸形患者近端交界性失败的特征及手术结果

Characterization and surgical outcomes of proximal junctional failure in surgically treated patients with adult spinal deformity.

作者信息

Yagi Mitsuru, Rahm Mark, Gaines Robert, Maziad Ali, Ross Tom, Kim Han Jo, Kebaish Khaled, Boachie-Adjei Oheneba

机构信息

*National Hospital Organization Murayama Medical Center, Tokyo †Scott and White Clinic, Temple, TX ‡Columbia Spine Center and Orthopaedic Group, Columbia, MO §Hospital for Special Surgery, New York, NY ¶Johns Hopkins University, Baltimore, MD; and Complex Spine Study Group, Leesburg VA, US.

出版信息

Spine (Phila Pa 1976). 2014 May 1;39(10):E607-14. doi: 10.1097/BRS.0000000000000266.

Abstract

STUDY DESIGN

Retrospective case series of surgically treated patients with adult spine deformity (ASD).

OBJECTIVE

To report the incidence of proximal junctional failure (PJF), characterize PJF and evaluate the outcome of revision surgery for PJF. A modified classification is also proposed.

SUMMARY OF BACKGROUND DATA

Although recent reports have shown the catastrophic results of PJF, few reports have shown the incidence, characteristics, and clinical outcomes of PJF in ASD.

METHODS

This retrospective analysis reviewed data entered prospectively into a multicenter database. Surgically treated patients with ASD with a minimum 2-year follow-up were included. PJF was defined as any type of symptomatic proximal junctional kyphosis (PJK) requiring surgery. On the basis of our previous classification, the following modified PJK classification was established: grade A, proximal junctional increase of 10° to 19°; grade B, 20° to 29°; and grade C, 30° or more. Three types of PJK were also defined: ligamentous failure (type 1), bone failure (type 2), and implant/bone interface failure (type 3). An additional criterion was added for the presence or absence of spondylolisthesis above the upper instrumentation vertebra (UIV).

RESULTS

PJF developed in 23 of the 1668 patients with ASD. The incidence of PJF was 1.4%. The mean age was 62.3 ± 7.9 years, and the mean follow-up was 4.0 ± 2.3 years. Seventeen patients had undergone prior surgical procedures. Six patients had UIV above T8, and 17 had UIV below T9. Six patients had associated spondylolisthesis above the UIV (PJF-S), whereas 17 patients did not (PJF-N). The radiographical data show a significant difference in the preoperative sagittal vertical axis between the PJF-S and PJF-N groups, whereas no significant difference was observed in the preoperative sagittal parameters (5.2 ± 3.9 cm vs. 11.4 ± 6.0 cm, P = 0.04). The most common type of PJF was type 2N. The PJF symptoms consisted of intolerable pain (n = 17), neurological deficits (n = 6), and progressive trunk deformity (n = 1). Eleven patients had additional PJK/PJF and 9 required additional revision surgical procedures.

CONCLUSION

The incidence of PJF among surgically treated patients with ASD was 1.4%. The most common type of PJF was 2N. Preoperative large sagittal vertical axis change and large amount of correction was a causative factor for spondylolisthesis above the UIV. After the revision surgery, further PJF was a commonly occurred event.

摘要

研究设计

对接受手术治疗的成人脊柱畸形(ASD)患者的回顾性病例系列研究。

目的

报告近端交界性失败(PJF)的发生率,描述PJF的特征并评估PJF翻修手术的结果。同时提出一种改良分类法。

背景数据总结

尽管近期报告显示了PJF的灾难性后果,但很少有报告显示ASD中PJF的发生率、特征和临床结果。

方法

这项回顾性分析回顾了前瞻性录入多中心数据库的数据。纳入接受手术治疗且至少随访2年的ASD患者。PJF定义为任何需要手术治疗的有症状的近端交界性后凸(PJK)。基于我们之前的分类,建立了以下改良的PJK分类:A级,近端交界性增加10°至19°;B级,20°至29°;C级,30°或更大。还定义了三种类型的PJK:韧带性失败(1型)、骨性失败(2型)和植入物/骨界面失败(3型)。增加了一个关于上位内固定椎体(UIV)上方是否存在椎体滑脱的额外标准。

结果

1668例ASD患者中有23例发生PJF。PJF的发生率为1.4%。平均年龄为62.3±7.9岁,平均随访时间为4.0±2.3年。17例患者曾接受过先前的手术。6例患者的UIV在T8以上,17例患者的UIV在T9以下。6例患者在UIV上方伴有椎体滑脱(PJF-S),而17例患者没有(PJF-N)。影像学数据显示PJF-S组和PJF-N组术前矢状垂直轴存在显著差异,而术前矢状参数无显著差异(5.2±3.9 cm对11.4±6.0 cm,P = 0.04)。最常见的PJF类型是2N型。PJF症状包括无法忍受的疼痛(n = 17)、神经功能缺损(n = 6)和进行性躯干畸形(n = 1)。11例患者有额外的PJK/PJF,9例患者需要额外的翻修手术。

结论

手术治疗的ASD患者中PJF的发生率为1.4%。最常见的PJF类型是2N型。术前矢状垂直轴变化大及矫正量大是UIV上方椎体滑脱的一个致病因素。翻修手术后,进一步发生PJF是常见事件。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验