Li Fang-Chi, Tsai Shin-Chi, Yeh Cheng-Yang, Yeh Je-Yuan, Chou Ying-Shiun, Ho Jeng-Rong, Tsiang Raymond Chien-Chao
J Nanosci Nanotechnol. 2014 Jul;14(7):5019-27. doi: 10.1166/jnn.2014.9259.
Using poly(3-hexylthiophene) (P3HT) covalently bonded with carbon nanotubes (CNT) as an active layer in a bottom-gate/top contact, Au/(P3HT)/(bilayer dielectric)/Si OTFT device has resulted in an enhanced charge transport. The CNTs were firstly functionalized via ligand exchange with ferrocene, next lithiated by sec-butyllithium (s-BuLi) and then linked anionically with P3HT which has been synthesized via the modified Grignard metathesis method. Compared to the pristine P3HT, the CNTs-containing P3HT composite material has a higher energy level of HOMO and a smaller electrochemical bandgap E(g)(chem). The smaller bandgap enhances the charge carrier transport and the higher HOMO energy level indicates a reduced barrier and an increased injection rate for charge carriers at the source contact. Furthermore, the threshold voltage V(T) of CNTs-containing P3HT samples is lower and its saturation current I(D) and the the field-effect mobility are higher. An OTFT device fabricated with such a composite sample containing 1.16% CNTs has a carrier mobility and saturation current three to five times higher than pristine P3HT.
在底栅/顶接触的Au/(聚(3 - 己基噻吩)(P3HT)/(双层电介质)/Si有机薄膜晶体管(OTFT)器件中,使用与碳纳米管(CNT)共价键合的聚(3 - 己基噻吩)(P3HT)作为有源层,可增强电荷传输。首先通过与二茂铁进行配体交换对碳纳米管进行功能化,接着用仲丁基锂(s - BuLi)进行锂化,然后与通过改进的格氏复分解法合成的P3HT进行阴离子连接。与原始P3HT相比,含碳纳米管的P3HT复合材料具有更高的最高占据分子轨道(HOMO)能级和更小的电化学带隙E(g)(chem)。较小的带隙增强了电荷载流子传输,而较高的HOMO能级表明在源极接触处电荷载流子的势垒降低且注入速率增加。此外,含碳纳米管的P3HT样品的阈值电压V(T)更低,其饱和电流I(D)和场效应迁移率更高。用含有1.16%碳纳米管的这种复合样品制造的OTFT器件,其载流子迁移率和饱和电流比原始P3HT高3至5倍。