Zhang Peng, Kopechek Jonathan A, Porter Tyrone M
Department of Mechanical Engineering, Boston University, 110 Cummington Street, Boston, MA, 02215, USA.
J Ther Ultrasound. 2013 Apr 25;1:2. doi: 10.1186/2050-5736-1-2. eCollection 2013.
The clinical feasibility of using high-intensity focused ultrasound (HIFU) for ablation of solid tumors is limited by the high acoustic pressures and long treatment times required. The presence of microbubbles during sonication can increase the absorption of acoustic energy and accelerate heating. However, formation of microbubbles within the tumor tissue remains a challenge. Phase-shift nanoemulsions (PSNE) have been developed as a means for producing microbubbles within tumors. PSNE are emulsions of submicron-sized, lipid-coated, and liquid perfluorocarbon droplets that can be vaporized into microbubbles using short (<1 ms), high-amplitude (>5 MPa) acoustic pulses. In this study, the impact of vaporized phase-shift nanoemulsions on the time and acoustic power required for HIFU-mediated thermal lesion formation was investigated in vitro.
PSNE containing dodecafluoropentane were produced with narrow size distributions and mean diameters below 200 nm using a combination of sonication and extrusion. PSNE was dispersed in albumin-containing polyacrylamide gel phantoms for experimental tests. Albumin denatures and becomes opaque at temperatures above 58°C, enabling visual detection of lesions formed from denatured albumin. PSNE were vaporized using a 30-cycle, 3.2-MHz, at an acoustic power of 6.4 W (free-field intensity of 4,586 W/cm(2)) pulse from a single-element, focused high-power transducer. The vaporization pulse was immediately followed by a 15-s continuous wave, 3.2-MHz signal to induce ultrasound-mediated heating. Control experiments were conducted using an identical procedure without the vaporization pulse. Lesion formation was detected by acquiring video frames during sonication and post-processing the images for analysis. Broadband emissions from inertial cavitation (IC) were passively detected with a focused, 2-MHz transducer. Temperature measurements were acquired using a needle thermocouple.
Bubbles formed at the HIFU focus via PSNE vaporization enhanced HIFU-mediated heating. Broadband emissions detected during HIFU exposure coincided in time with measured accelerated heating, which suggested that IC played an important role in bubble-enhanced heating. In the presence of bubbles, the acoustic power required for the formation of a 9-mm(3) lesion was reduced by 72% and the exposure time required for the onset of albumin denaturation was significantly reduced (by 4 s), provided that the PSNE volume fraction in the polyacrylamide gel was at least 0.008%.
The time or acoustic power required for lesion formation in gel phantoms was dramatically reduced by vaporizing PSNE into bubbles. These results suggest that PSNE may improve the efficiency of HIFU-mediated thermal ablation of solid tumors; thus, further investigation is warranted to determine whether bubble-enhanced HIFU may potentially become a viable option for cancer therapy.
高强度聚焦超声(HIFU)用于实体瘤消融的临床可行性受到所需高声压和长治疗时间的限制。超声处理过程中微泡的存在可增加声能吸收并加速加热。然而,在肿瘤组织内形成微泡仍然是一项挑战。相移纳米乳剂(PSNE)已被开发为一种在肿瘤内产生微泡的手段。PSNE是亚微米大小、脂质包裹的液态全氟碳液滴的乳剂,可使用短(<1毫秒)、高振幅(>5兆帕)的声脉冲汽化为微泡。在本研究中,体外研究了汽化相移纳米乳剂对HIFU介导的热损伤形成所需时间和声功率的影响。
使用超声处理和挤压相结合的方法制备了含有十二氟戊烷的PSNE,其尺寸分布狭窄,平均直径低于200纳米。将PSNE分散在含白蛋白的聚丙烯酰胺凝胶体模中进行实验测试。白蛋白在温度高于58°C时变性并变得不透明,从而能够目视检测由变性白蛋白形成的损伤。使用来自单元素聚焦高功率换能器的30周期、3.2兆赫、声功率为6.4瓦(自由场强度为4586瓦/平方厘米)的脉冲使PSNE汽化。汽化脉冲之后立即施加15秒的3.2兆赫连续波信号以诱导超声介导的加热。使用相同程序但不施加汽化脉冲进行对照实验。在超声处理过程中采集视频帧并对图像进行后处理以进行分析来检测损伤形成。使用聚焦的2兆赫换能器被动检测惯性空化(IC)的宽带发射。使用针型热电偶进行温度测量。
通过PSNE汽化在HIFU焦点处形成的气泡增强了HIFU介导的加热。在HIFU暴露期间检测到的宽带发射与测量到的加速加热在时间上一致,这表明IC在气泡增强加热中起重要作用。在有气泡的情况下,形成9立方毫米损伤所需的声功率降低了72%,并且白蛋白变性开始所需的暴露时间显著减少(减少4秒),前提是聚丙烯酰胺凝胶中PSNE的体积分数至少为0.008%。
通过将PSNE汽化为气泡,凝胶体模中形成损伤所需的时间或声功率显著降低。这些结果表明,PSNE可能提高HIFU介导的实体瘤热消融效率;因此,有必要进一步研究以确定气泡增强HIFU是否可能成为一种可行的癌症治疗选择。