Platten David John
Medical Physics Department, Northampton General Hospital, Billing Road, Northampton NN1 5BD, UK.
J Radiol Prot. 2014 Jun;34(2):445-56. doi: 10.1088/0952-4746/34/2/445. Epub 2014 Jun 4.
Existing data used to calculate the barrier transmission of scattered radiation from computed tomography (CT) are based on primary beam CT energy spectra. This study uses the EGSnrc Monte Carlo system and Epp user code to determine the energy spectra of CT scatter from four different primary CT beams passing through an ICRP 110 male reference phantom. Each scatter spectrum was used as a broad-beam x-ray source in transmission simulations through seventeen thicknesses of lead (0.00-3.50 mm). A fit of transmission data to lead thickness was performed to obtain α, β and γ parameters for each spectrum. The mean energy of the scatter spectra were up to 12.3 keV lower than that of the primary spectrum. For 120 kVp scatter beams the transmission through lead was at least 50% less than predicted by existing data for thicknesses of 1.5 mm and greater; at least 30% less transmission was seen for 140 kVp scatter beams. This work has shown that the mean energy and half-value layer of CT scatter spectra are lower than those of the corresponding primary beam. The transmission of CT scatter radiation through lead is lower than that calculated with currently available data. Using the data from this work will result in less lead shielding being required for CT scanner installations.
用于计算计算机断层扫描(CT)散射辐射屏蔽传输的现有数据是基于原发射线CT能谱。本研究使用EGSnrc蒙特卡罗系统和Epp用户代码,来确定穿过国际辐射防护委员会(ICRP)110号男性参考体模的四种不同原发射线CT束产生的CT散射能谱。在通过17种不同厚度(0.00 - 3.50毫米)铅板的传输模拟中,每种散射能谱都被用作宽束X射线源。对传输数据与铅板厚度进行拟合,以获得每种能谱的α、β和γ参数。散射能谱的平均能量比原发射线能谱低达12.3 keV。对于120 kVp的散射束,当铅板厚度为1.5毫米及更厚时,其通过铅板的传输比现有数据预测的至少低50%;对于140 kVp的散射束,传输至少低30%。这项工作表明,CT散射能谱的平均能量和半价层低于相应的原发射线。CT散射辐射通过铅板的传输低于用现有数据计算的结果。使用本研究的数据将减少CT扫描仪安装所需的铅屏蔽量。