Majidi Keivan, Wernick Miles N, Li Jun, Muehleman Carol, Brankov Jovan G
Department of Electrical and Computer Engineering, Illinois Institute of Technology, Chicago, IL 60616, USA.
Phys Med Biol. 2014 Jul 7;59(13):3483-500. doi: 10.1088/0031-9155/59/13/3483. Epub 2014 Jun 5.
Multiple-image radiography (MIR) is an analyzer-based phase-contrast x-ray imaging method, which is emerging as a potential alternative to conventional radiography. MIR simultaneously generates three planar parametric images containing information about scattering, refraction and attenuation properties of the object. The MIR planar images are linear tomographic projections of the corresponding object properties, which allows reconstruction of volumetric images using computed tomography (CT) methods. However, when acquiring a full range of linear projections around the tissue of interest is not feasible or the scanning time is limited, limited-angle tomography techniques can be used to reconstruct these volumetric images near the central plane, which is the plane that contains the pivot point of the tomographic movement. In this work, we use computer simulations to explore the applicability of limited-angle tomography to MIR. We also investigate the accuracy of reconstructions as a function of number of tomographic angles for a fixed total radiation exposure. We use this function to find an optimal range of angles over which data should be acquired for limited-angle tomography MIR (LAT-MIR). Next, we apply the LAT-MIR technique to experimentally acquired MIR projections obtained in a cadaveric human thumb study. We compare the reconstructed slices near the central plane to the same slices reconstructed by CT-MIR using the full angular view around the object. Finally, we perform a task-based evaluation of LAT-MIR performance for different numbers of angular views, and use template matching to detect cartilage in the refraction image near the central plane. We use the signal-to-noise ratio of this test as the detectability metric to investigate an optimum range of tomographic angles for detecting soft tissues in LAT-MIR. Both results show that there is an optimum range of angular view for data acquisition where LAT-MIR yields the best performance, comparable to CT-MIR only if one considers volumetric images near the central plane and not the whole volume.
多图像射线照相术(MIR)是一种基于分析仪的相衬X射线成像方法,正逐渐成为传统射线照相术的一种潜在替代方法。MIR同时生成三个平面参数图像,包含有关物体散射、折射和衰减特性的信息。MIR平面图像是相应物体特性的线性断层投影,这使得可以使用计算机断层扫描(CT)方法重建体积图像。然而,当在感兴趣组织周围获取全方位的线性投影不可行或扫描时间有限时,可以使用有限角度断层扫描技术在中心平面附近重建这些体积图像,中心平面是包含断层运动枢轴点的平面。在这项工作中,我们使用计算机模拟来探索有限角度断层扫描对MIR的适用性。我们还研究了在固定总辐射剂量下,重建精度与断层角度数量的函数关系。我们使用这个函数来找到有限角度断层扫描MIR(LAT-MIR)数据采集的最佳角度范围。接下来,我们将LAT-MIR技术应用于在尸体人类拇指研究中实验获取的MIR投影。我们将中心平面附近重建的切片与使用围绕物体的全角视图通过CT-MIR重建的相同切片进行比较。最后,我们针对不同数量的角度视图对LAT-MIR性能进行基于任务的评估,并使用模板匹配在中心平面附近的折射图像中检测软骨。我们将此测试的信噪比作为可检测性指标,以研究LAT-MIR中检测软组织的断层角度最佳范围。两个结果都表明,存在一个数据采集的最佳角度范围,在此范围内LAT-MIR具有最佳性能,仅当考虑中心平面附近的体积图像而非整个体积时,其性能与CT-MIR相当。