Jiangxi Key Laboratory of Mining Engineering, Jiangxi University of Science and Technology, Jiangxi 341000, China; Faculty of Resource and Environmental Engineering, Jiangxi University of Science and Technology, Jiangxi 341000, China.
Jiangxi Key Laboratory of Mining Engineering, Jiangxi University of Science and Technology, Jiangxi 341000, China.
J Hazard Mater. 2014 Aug 30;279:384-8. doi: 10.1016/j.jhazmat.2014.07.027. Epub 2014 Jul 21.
With an increase in number of waste nickel-metal hydride batteries, and because of the importance of rare earth elements, the recycling of rare earth elements is becoming increasingly important. In this paper, we investigate the effects of temperature, hydrochloric acid concentration, and leaching time to optimize leaching conditions and determine leach kinetics. The results indicate that an increase in temperature, hydrochloric acid concentration, and leaching time enhance the leaching rate of rare earth elements. A maximum rare earth elements recovery of 95.16% was achieved at optimal leaching conditions of 70°C, solid/liquid ratio of 1:10, 20% hydrochloric acid concentration, -74μm particle size, and 100min leaching time. The experimental data were best fitted by a chemical reaction-controlled model. The activation energy was 43.98kJ/mol and the reaction order for hydrochloric acid concentration was 0.64. The kinetic equation for the leaching process was found to be: 1-(1-x)(1/3)=A/ρr0HClexp-439,8008.314Tt. After leaching and filtration, by adding saturated oxalic solution to the filtrate, rare earth element oxalates were obtained. After removing impurities by adding ammonia, filtering, washing with dilute hydrochloric acid, and calcining at 810°C, a final product of 99% pure rare earth oxides was obtained.
随着废镍氢电池数量的增加,并且由于稀土元素的重要性,稀土元素的回收变得越来越重要。在本文中,我们研究了温度、盐酸浓度和浸出时间对优化浸出条件和确定浸出动力学的影响。结果表明,升高温度、盐酸浓度和浸出时间均能提高稀土元素的浸出率。在最佳浸出条件下,即 70°C、固液比为 1:10、20%盐酸浓度、-74μm 粒径和 100min 浸出时间,可实现 95.16%的稀土元素最大回收率。实验数据最好通过化学反应控制模型拟合。活化能为 43.98kJ/mol,盐酸浓度的反应级数为 0.64。浸出过程的动力学方程为:1-(1-x)(1/3)=A/ρr0HClexp-439,8008.314Tt。浸出和过滤后,通过向滤液中添加饱和草酸溶液,得到稀土元素草酸盐。通过添加氨去除杂质、过滤、用稀盐酸洗涤、并在 810°C 下煅烧,可得到最终产品 99%纯度的稀土氧化物。