Department of Bioprocess Engineering, Faculty of Chemical Engineering, c/o Institute of Bioproduct Development (IBD), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
Department of Bioprocess Engineering, Faculty of Chemical Engineering, c/o Institute of Bioproduct Development (IBD), Universiti Teknologi Malaysia, 81310 UTM Johor Bahru, Johor, Malaysia.
Bioresour Technol. 2014 Nov;171:477-81. doi: 10.1016/j.biortech.2014.08.024. Epub 2014 Aug 12.
The types of microalgae strains and the method used in lipid extraction have become crucial factors which influence the productivity of crude oil. In this paper, Nannochloropsis sp. and Tetraselmis sp. were chosen as the strains and four different methods were used to extract the lipids: Hara and Radin, Folch, Chen and Bligh and Dyer. These methods were performed by using conventional heating and microwave irradiation methods. Results revealed that highest lipid yield from the different species was obtained using different extraction methods; both under microwave irradiation. The lipid yield for Tetraselmis sp. and Nannochloropsis sp. was highest when Hara and Radin (8.19%), and Folch (8.47%) methods were used respectively under microwave irradiation. The lipids extracted were then transesterified to biodiesel and the quality of the biodiesel was analyzed using the gas chromatography.
微藻菌株的类型和脂质提取所采用的方法已成为影响原油产量的关键因素。在本研究中,选用了盐藻和球等鞭金藻作为藻种,并采用了四种不同的方法来提取脂质:哈拉和拉丁法、 Folch 法、陈和布莱igh 法和 Dyer 法。这些方法分别采用常规加热和微波辐射的方法进行。结果表明,不同的藻种采用不同的提取方法,在微波辐射下,其产油量均最高。在微波辐射下,盐藻和球等鞭金藻采用哈拉和拉丁法(8.19%)和 Folch 法(8.47%)时,脂质产率最高。提取的脂质随后被酯化为生物柴油,并使用气相色谱法分析生物柴油的质量。