Suppr超能文献

使用季铵盐半笼形水合物捕获二氧化碳:二氧化碳和氮气包合引起的结构变化

CO2 capture using semi-clathrates of quaternary ammonium salt: structure change induced by CO2 and N2 enclathration.

作者信息

Chazallon Bertrand, Ziskind Michael, Carpentier Yvain, Focsa Cristian

机构信息

Laboratoire de Physique des Lasers, Atomes et Molécules (PhLAM), UMR CNRS 8523, University Lille 1 , Bat. P5, F-59655 Villeneuve d'Ascq, France.

出版信息

J Phys Chem B. 2014 Nov 26;118(47):13440-52. doi: 10.1021/jp507789z. Epub 2014 Oct 14.

Abstract

Semi-clathrates of tetrabutylammonium bromide (TBAB) are investigated for their potential application in the CO2 capture context based on hydrate technology. The three-phase lines of semi-clathrates of CO2-TBAB-H2O and N2-TBAB-H2O are established simultaneously with their structure using in situ Raman scattering performed at high pressure. The preferred crystal phase obtained at ambient pressure from solutions of 5 and 40 wt % TBAB initial concentrations is shown to change upon enclathration of CO2 or N2, or by applying a higher pressure on the system. Deep in the stability field, metastable hydrate phases are occurring at the onset of the formation and correspond to the ones expected under ambient pressure conditions. Depending on the pressure, they progressively transformed into the most stable ones when approaching equilibrium and dissociation points. Besides, it is shown that a 5 wt % TBAB original solution forms preferentially a mixed structure of both type B and type A at low gas pressure with CO2 as the guest gas. A new structure is spectroscopically characterized at pressures higher than ∼2 MPa CO2. Type A is demonstrated to be stable at 5 wt % initial TBAB concentration with N2 as the guest molecule and pressure between 8 and 12 MPa. These structural data address new insights on the relationship between the hydrophilic-anion and hydrophobic-cation intercalation with a guest gas producing hydrophobic interaction in a distorted water lattice.

摘要

基于水合物技术,对四丁基溴化铵(TBAB)的半笼形水合物在二氧化碳捕集方面的潜在应用进行了研究。利用高压原位拉曼散射,同时确定了二氧化碳 - TBAB - 水和氮气 - TBAB - 水半笼形水合物的三相线及其结构。结果表明,在环境压力下,初始浓度为5 wt%和40 wt%的TBAB溶液形成的优选晶相,在二氧化碳或氮气包合后,或对系统施加更高压力时会发生变化。在稳定性区域深处,亚稳态水合物相在形成开始时出现,且与环境压力条件下预期的相相对应。根据压力不同,当接近平衡和解离点时,它们会逐渐转变为最稳定的相。此外,研究表明,当以二氧化碳作为客体气体时,5 wt%的TBAB原始溶液在低气压下优先形成B型和A型的混合结构。在高于约2 MPa二氧化碳的压力下,通过光谱表征确定了一种新结构。当以氮气作为客体分子且压力在8至12 MPa之间时,A型结构在初始TBAB浓度为5 wt%时被证明是稳定的。这些结构数据为亲水性阴离子和疏水性阳离子插层与在扭曲水晶格中产生疏水相互作用的客体气体之间的关系提供了新的见解。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验