Suppr超能文献

单孔腹腔镜胆囊切除术在加勒比地区的发展:使用传统器械且无操作孔道的直接经筋膜穿刺技术

Evolution of SILS Cholecystectomy in the Caribbean: The Direct Transfascial Puncture Technique Using Conventional Instruments without Working Ports.

作者信息

Cawich Shamir O, Thomas Dexter, Hassranah Dale, Naraynsingh Vijay

机构信息

Department of Clinical Surgical Sciences, University of the West Indies, St. Augustine Campus, St. Augustine, Trinidad and Tobago.

出版信息

Case Rep Surg. 2014;2014:164342. doi: 10.1155/2014/164342. Epub 2014 Oct 2.

Abstract

Introduction. Single incision laparoscopic cholecystectomy (SILC) has become accepted as an alternative to conventional multiport cholecystectomy. However, SILC is still limited in applicability in low resource centres due to the expense associated with specialized access platforms, curved instruments, and flexible scopes. Presentation of Case. We present three cases where a modified SILC technique was used with conventional instruments and no working ports. The evolution of this technique is described. Discussion. In order to contain cost, we used conventional instruments and three transfascial ports placed in an umbilical incision, but we noted significant instrument clashes that originated at the port platforms. Therefore, we modified our technique by omitting ports for the working instruments. The technique allowed us to exchange instruments as necessary, maximized ergonomics, and prevented collisions from the bulky port platforms. Finally, the puncture left by the instrument alone did not require fascial closure at the termination of the procedure. Conclusion. The direct transfascial puncture using conventional laparoscopic instruments without working ports is a feasible option that minimizes cost and increases ergonomics.

摘要

引言。单孔腹腔镜胆囊切除术(SILC)已被公认为传统多孔胆囊切除术的替代方法。然而,由于与专用接入平台、弯曲器械和可弯曲内镜相关的费用,SILC在资源匮乏的中心的适用性仍然有限。病例介绍。我们展示了三例使用改良SILC技术、常规器械且无操作孔的病例。描述了该技术的演变过程。讨论。为了控制成本,我们使用常规器械并在脐部切口处放置了三个经筋膜孔,但我们注意到在孔平台处出现了严重的器械碰撞。因此,我们通过省略操作器械的孔来改良我们的技术。该技术使我们能够根据需要更换器械,最大限度地提高了人体工程学效率,并防止了笨重的孔平台发生碰撞。最后,仅由器械留下的穿刺孔在手术结束时不需要筋膜缝合。结论。使用无操作孔的常规腹腔镜器械进行直接经筋膜穿刺是一种可行的选择,可将成本降至最低并提高人体工程学效率。

https://cdn.ncbi.nlm.nih.gov/pmc/blobs/3d56/4202274/9a4177acbc38/CRIS2014-164342.001.jpg

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验