Drazek Laurent, Tournoud Maud, Derepas Frédéric, Guicherd Maryse, Mahé Pierre, Pinston Frédéric, Veyrieras Jean-Baptiste, Chatellier Sonia
bioMérieux SA, Innovation Unit, Technology Research Department, Grenoble, France.
bioMérieux SA, Innovation Unit, Bioinformatics Research Department, Grenoble, France.
J Microbiol Methods. 2015 Feb;109:149-56. doi: 10.1016/j.mimet.2014.12.011. Epub 2014 Dec 20.
For the last century, in vitro diagnostic process in microbiology has mainly relied on the growth of bacteria on the surface of a solid agar medium. Nevertheless, few studies focused in the past on the dynamics of microcolonies growth on agar surface before 8 to 10h of incubation. In this article, chromatic confocal microscopy has been applied to characterize the early development of a bacterial colony. This technology relies on a differential focusing depth of the white light. It allows one to fully measure the tridimensional shape of microcolonies more quickly than classical confocal microscopy but with the same spatial resolution. Placing the device in an incubator, the method was able to individually track colonies growing on an agar plate, and to follow the evolution of their surface or volume. Using an appropriate statistical modeling framework, for a given microorganism, the doubling time has been estimated for each individual colony, as well as its variability between colonies, both within and between agar plates. A proof of concept led on four bacterial strains of four distinct species demonstrated the feasibility and the interest of the approach. It showed in particular that doubling times derived from early tri-dimensional measurements on microcolonies differed from classical measurements in micro-dilutions based on optical diffusion. Such a precise characterization of the tri-dimensional shape of microcolonies in their late-lag to early-exponential phase could be beneficial in terms of in vitro diagnostics. Indeed, real-time monitoring of the biomass available in a colony could allow to run well established microbial identification workflows like, for instance, MALDI-TOF mass-spectrometry, as soon as a sufficient quantity of material is available, thereby reducing the time needed to provide a diagnostic. Moreover, as done for pre-identification of macro-colonies, morphological indicators such as three-dimensional growth profiles derived from microcolonies could be used to perform a first pre-identification step, but in a shorten time.
在过去的一个世纪里,微生物学中的体外诊断过程主要依赖于细菌在固体琼脂培养基表面的生长。然而,过去很少有研究关注培养8至10小时之前琼脂表面微菌落的生长动态。在本文中,彩色共聚焦显微镜已被用于表征细菌菌落的早期发育。该技术依赖于白光的不同聚焦深度。与传统共聚焦显微镜相比,它能够更快地全面测量微菌落的三维形状,且具有相同的空间分辨率。将该设备置于培养箱中,该方法能够单独追踪琼脂平板上生长的菌落,并跟踪其表面或体积的变化。使用适当的统计建模框架,对于给定的微生物,已估计出每个单独菌落的倍增时间,以及不同琼脂平板之间和内部菌落之间的变异性。对四种不同物种的四种细菌菌株进行的概念验证证明了该方法的可行性和实用性。特别表明,从微菌落早期三维测量得出的倍增时间与基于光扩散的微量稀释中的传统测量结果不同。在体外诊断方面,对微菌落在延迟后期到指数早期阶段的三维形状进行如此精确的表征可能是有益的。实际上,一旦有足够数量的材料,对菌落中可用生物量的实时监测可以允许运行成熟的微生物鉴定工作流程,例如基质辅助激光解吸电离飞行时间质谱法,从而减少提供诊断所需的时间。此外,正如对大菌落进行预鉴定时所做的那样,源自微菌落的三维生长曲线等形态学指标可用于执行第一步预鉴定,但所需时间更短。