Massin Frédéric, Huili Cai, Decot Véronique, Stoltz Jean-François, Bensoussan Danièle, Latger-Cannard Véronique
Plate-forme de Cytométrie en Flux, CHU de Nancy, Vandœuvre-lès-Nancy, France.
Service d'Hématologie Biologique, CHU de Nancy, Vandœuvre-lès-Nancy, France.
Biomed Mater Eng. 2015;25(1 Suppl):27-39. doi: 10.3233/BME-141226.
Stem cells for autologous and allogenic transplantation are obtained from several sources including bone marrow, peripheral blood or cord blood. Accurate enumeration of viable CD34+ hematopoietic stem cells (HSC) is routinely used in clinical settings, especially to monitor progenitor cell mobilization and apheresis. The number of viable CD34+ HSC has also been shown to be the most critical factor in haematopoietic engraftment. The International Society for Cellular Therapy actually recommends the use of single-platform flow cytometry system using 7-AAD as a viability dye.
In a way to move routine analysis from a BD FACSCaliburTM instrument to a BD FACSCantoTM II, according to ISO 15189 standard guidelines, we define laboratory performance data of the BDTM Stem Cell Enumeration (SCE) kit on a CE-IVD system including a BD FACSCanto II flow cytometer and the BD FACSCantoTM Clinical Software. InterQCTM software, a real time internet laboratory QC management system developed by VitroTM and distributed by Becton DickinsonTM, was also tested to monitor daily QC data, to define the internal laboratory statistics and to compare them to external laboratories.
Precision was evaluated with BDTM Stem Cell Control (high and low) results and the InterQC software, an internet laboratory QC management system by Vitro. This last one drew Levey-Jennings curves and generated numeral statistical parameters allowing detection of potential changes in the system performances as well as interlaboratory comparisons. Repeatability, linearity and lower limits of detection were obtained with routine samples from different origins. Agreement evaluation between BD FACSCanto II system versus BD FACSCalibur system was tested on fresh peripheral blood, freeze-thawed apheresis, fresh bone marrow and fresh cord blood samples.
Instrument's measure and staining repeatability clearly evidenced acceptable variability on the different samples tested. Intra- and inter-laboratory CV in CD34+ cell absolute count are consistent and reproducible. Linearity analysis, established between 2 and 329 cells/μl showed a linear relation between expected counts and measured counts (R2=0.97). Linear regression and Bland-Altman representations showed an excellent correlation on samples from different sources between the two systems and allowed the transfer of routine analysis from BD FACSCalibur to BD FACSCanto II.
The BD SCE kit provides an accurate measure of the CD34 HSC, and can be used in daily routine to optimize the enumeration of hematopoietic CD34+ stem cells by flow cytometry. Moreover, the InterQC system seems to be a very useful tool for laboratory daily quality monitoring and thus for accreditation.
用于自体和异体移植的干细胞可从多个来源获取,包括骨髓、外周血或脐带血。在临床环境中,通常会对存活的CD34+造血干细胞(HSC)进行精确计数,尤其是用于监测祖细胞动员和单采。存活的CD34+HSC数量也被证明是造血植入的最关键因素。国际细胞治疗协会实际上推荐使用以7-氨基放线菌素D作为活力染料的单平台流式细胞术系统。
为了按照ISO 15189标准指南将常规分析从BD FACSCaliburTM仪器转移至BD FACSCantoTM II,我们定义了BDTM干细胞计数(SCE)试剂盒在CE-IVD系统上的实验室性能数据,该系统包括BD FACSCanto II流式细胞仪和BD FACSCantoTM临床软件。还对InterQCTM软件进行了测试,它是由VitroTM开发并由贝克顿·迪金森公司经销的实时互联网实验室质量控制管理系统,用于监测每日质量控制数据、定义内部实验室统计数据并与外部实验室进行比较。
使用BDTM干细胞对照品(高值和低值)结果以及InterQC软件(Vitro公司的互联网实验室质量控制管理系统)评估精密度。后者绘制了Levey-Jennings曲线并生成数字统计参数,从而能够检测系统性能的潜在变化以及进行实验室间比较。通过来自不同来源的常规样本获得重复性、线性和检测下限。在新鲜外周血、冻融单采样本、新鲜骨髓和新鲜脐带血样本上测试了BD FACSCanto II系统与BD FACSCalibur系统之间的一致性评估。
仪器测量和染色的重复性在测试的不同样本上均清楚地证明了可接受的变异性。CD34+细胞绝对计数的实验室内和实验室间变异系数是一致且可重复的。在2至329个细胞/μl之间建立的线性分析显示预期计数与测量计数之间呈线性关系(R2 = 0.97)。线性回归和Bland-Altman图表明两个系统在不同来源样本上具有极佳的相关性,并允许将常规分析从BD FACSCalibur转移至BD FACSCanto II。
BD SCE试剂盒可对CD34 HSC进行准确测量,并可在日常工作中用于通过流式细胞术优化造血CD34+干细胞的计数。此外,InterQC系统似乎是实验室日常质量监测以及认证的非常有用的工具。