Amor Carlos, Lucas Marco S, García Juan, Dominguez Joaquín R, De Heredia J Beltrán, Peres José A
a Centro de Química de Vila Real , Universidade de Trás-os-Montes e Alto Douro (UTAD) , Vila Real , Portugal.
J Environ Sci Health A Tox Hazard Subst Environ Eng. 2015;50(2):161-8. doi: 10.1080/10934529.2015.975065.
This work presents the application of Fenton's reagent process combined with anaerobic digestion to treat an olive mill wastewater (OMW). Firstly, OMW was pre-treated by chemical oxidation in a batch reactor with Fenton's reagent, using a fixed H2O2/COD ratio of 0.20, pH = 3.5 and a H2O2/Fe(2+) molar ratio of 15:1. This advanced oxidation treatment allowed reaching reductions of 17.6 and 82.5% of chemical oxygen demand (COD) and total polyphenols (TP), respectively. Secondly, OMW treatment by anaerobic digestion was performed using previously adapted microorganisms immobilized in Sepiolite. These biological tests were carried out varying the substrate concentration supplied to the reactor and COD conversions from 52 to 74% were obtained. Afterwards, Fenton's reagent followed by anaerobic digestion was applied to OMW treatment. This combined process presented a significant improvement on organic load removal, reaching COD degradations from 64 to 88%. Beyond the pollutant load removal, it was also monitored the yield of methane generated throughout anaerobic experiments. The methane produced ranged from 281 cm(3) to 322 cm(3) of CH4/g COD removed. Additionally, a methane generation kinetic study was performed using the Monod Model. The application of this model allowed observing a kinetic constant increase of the combined process (kFN = 0.036 h(-1)) when compared to the single anaerobic process (kF = 0.017 h(-1)).
本研究介绍了芬顿试剂法与厌氧消化相结合处理橄榄油厂废水(OMW)的应用。首先,在间歇式反应器中用芬顿试剂对OMW进行化学氧化预处理,固定H2O2/COD比为0.20,pH = 3.5,H2O2/Fe(2+)摩尔比为15:1。这种高级氧化处理分别使化学需氧量(COD)和总多酚(TP)降低了17.6%和82.5%。其次,使用固定在海泡石中的预先驯化的微生物对OMW进行厌氧消化处理。这些生物试验通过改变供给反应器的底物浓度进行,COD转化率达到了52%至74%。之后,将芬顿试剂法与厌氧消化相结合用于OMW处理。这种联合工艺在有机负荷去除方面有显著改善,COD降解率从64%提高到88%。除了去除污染物负荷外,还监测了整个厌氧实验过程中产生的甲烷产量。产生的甲烷量为每克去除的COD产生281 cm(3)至322 cm(3)的CH4。此外,使用莫诺德模型进行了甲烷生成动力学研究。与单一厌氧工艺(kF = 0.017 h(-1))相比,该模型的应用使得联合工艺的动力学常数增加(kFN = 0.036 h(-1))。