Mohammadi Bassir Mahshid, Rezvani Mohammad Bagher, Chiniforush Nasim, Moradi Zohreh
Department of Operative Dentistry, School of Dentistry, Shahed University of Medical Sciences, Tehran, Iran.
Laser Research Center of Dentistry (LRCD), School of Dentistry, Tehran University of Medical Sciences, Tehran, Iran.
J Lasers Med Sci. 2013 Fall;4(4):168-74.
The aim of this study was to evaluate the effect of dental surface treatment with Erbium-Doped Yttrium Aluminum Garnet(Er: YAG), Neodymium-Doped Yttrium Aluminium Garnet(Nd: YAG) and Carbon Dioxide Laser (CO2) lasers and sodium ascorbate to recently home bleached enamel by scanning electron microscope (SEM).
Thirty extracted human third molars were selected for this in vitro study. The teeth were randomly divided in two groups including home bleached group and control group (non-bleached). In group 1, the samples were bleached by home bleach technique. No bleaching procedure was done in second the group which served as control group.Then , the samples of two groups were divided to five subgroups as follow: Subgroup 1: treated using Nd:YAG laser with output power of 1 W, Subgroup 2: treated using Er:YAG laser with output power of 0.5 W, Subgroup 3: treated using CO2 laser with output power of 0.5 W, Subgroup 4: sodium ascorbate 10%, Subgroup 5: no treatment. After treatments, the surfaces were evaluated using Scanning Electron Microscope (SEM) analysis.
The surfaces treated by Nd:YAG laser showed some melting and recrystallized areas and in some area droplet pattern was observed. But the surface treated by Er:YAG laser showed irregular and micro porous surface with flake pattern. CO2 laser treatment of home-bleached surfaces resulted in melting area and cracks. Sodium ascorbate did not change the home-bleached surface.
Among different surface treatments used in this study, it seems that Er:YAG laser can best interact with home-bleached teeth.
本研究的目的是通过扫描电子显微镜(SEM)评估掺铒钇铝石榴石(Er:YAG)激光、掺钕钇铝石榴石(Nd:YAG)激光、二氧化碳激光(CO2)以及抗坏血酸钠对近期家庭漂白牙釉质的牙齿表面处理效果。
选取30颗拔除的人类第三磨牙进行这项体外研究。牙齿被随机分为两组,包括家庭漂白组和对照组(未漂白)。在第1组中,样本采用家庭漂白技术进行漂白。第二组作为对照组未进行漂白程序。然后,将两组样本再分为五个亚组,如下:亚组1:使用输出功率为1W的Nd:YAG激光处理;亚组2:使用输出功率为0.5W的Er:YAG激光处理;亚组3:使用输出功率为0.5W的CO2激光处理;亚组4:10%的抗坏血酸钠处理;亚组5:不进行处理。处理后,使用扫描电子显微镜(SEM)分析评估表面情况。
经Nd:YAG激光处理的表面显示出一些熔化和重结晶区域,在某些区域观察到液滴图案。但经Er:YAG激光处理的表面呈现不规则且有微孔隙的表面以及片状图案。CO2激光处理家庭漂白表面导致熔化区域和裂纹。抗坏血酸钠未改变家庭漂白表面。
在本研究使用的不同表面处理方法中,似乎Er:YAG激光与家庭漂白牙齿的相互作用最佳。