Ben Aissa Mohamed Ali, Tremblay Benoît, Andrieux-Ledier Amandine, Maisonhaute Emmanuel, Raouafi Noureddine, Courty Alexa
Laboratoire de Chimie Analytique et Electrochimie, Département de Chimie, Faculté des Sciences de Tunis, Université de Tunis El Manar, campus universitaire de Tunis El Manar, 2092 Tunis El Manar, Tunisie.
Nanoscale. 2015 Feb 21;7(7):3189-95. doi: 10.1039/c4nr06893a.
Here, we report a new synthetic route for spherical small copper nanoparticles (CuNPs) with size ranging from 3.5 nm to 11 nm and with an unprecedented associated monodispersity (<10%). This synthesis is based on the reduction of an organometallic precursor (CuCl(PPh3)3) by tert-butylamine borane in the presence of dodecylamine (DDA) at a moderate temperature (50 to 100 °C). Because of their narrow size distribution, the CuNPs form long-range 2D organizations (several μm(2)). The wide range of CuNPs sizes is obtained by controlling the reaction temperature and DDA-to-copper phosphine salt ratio during the synthesis process. The addition of oleic acid (OA) after the synthesis stabilizes the CuNPs (no coalescence) for several weeks under a nitrogen atmosphere. The nature and the reactivity of the ligands were studied by IR and UV-visible spectroscopy. We thus show that just after synthesis the nanoparticles are coated by phosphine and DDA. After adding OA, a clear exchange between phosphine and OA is evidenced. This exchange is possible thanks to an acid-base reaction between the free alkylamine in excess in the solution and OA. OA is then adsorbed on the NPs surface in the form of carboxylate. Furthermore, the use of oleylamine (OYA) instead of DDA as the capping agent allows one to obtain other NP shapes (nanorods, triangles and nanodisks). We get evidence that OYA allows the selective adsorption of chloride ions derived from the copper precursor on the different crystallographic faces during the growth of CuNPs that induces the formation of anisotropic shapes such nanorods or triangles.
在此,我们报道了一种新的合成路线,用于制备尺寸范围为3.5纳米至11纳米且具有前所未有的单分散性(<10%)的球形小铜纳米颗粒(CuNP)。这种合成方法是基于在十二烷基胺(DDA)存在下,于中等温度(50至100°C)用叔丁胺硼烷还原有机金属前体(CuCl(PPh3)3)。由于其窄尺寸分布,CuNP形成了长程二维组织(几μm(2))。通过在合成过程中控制反应温度和DDA与铜膦盐的比例可获得宽范围的CuNP尺寸。合成后添加油酸(OA)可在氮气气氛下使CuNP稳定数周(无聚结)。通过红外光谱和紫外可见光谱研究了配体的性质和反应性。我们因此表明,刚合成后纳米颗粒就被膦和DDA包覆。添加OA后,膦和OA之间发生了明显的交换。由于溶液中过量的游离烷基胺与OA之间的酸碱反应,这种交换是可能的。然后OA以羧酸盐的形式吸附在NP表面。此外,使用油胺(OYA)代替DDA作为封端剂能够获得其他NP形状(纳米棒、三角形和纳米盘)。我们有证据表明,在CuNP生长过程中,OYA能使源自铜前体的氯离子选择性吸附在不同晶面上,从而诱导形成诸如纳米棒或三角形等各向异性形状。