Dange P N, Kulkarni A V, Rathod V K
Department of Chemical Engineering, Institute of Chemical Technology, Matunga (E), Mumbai 400019, India.
Department of Chemical Engineering, Institute of Chemical Technology, Matunga (E), Mumbai 400019, India.
Ultrason Sonochem. 2015 Sep;26:257-264. doi: 10.1016/j.ultsonch.2015.02.014. Epub 2015 Mar 6.
Ultrasound assisted esterification of butyric acid with methanol was investigated in an ultrasound irradiated isothermal batch reactor using acid ion-exchange resin (amberlyst-15) as a catalyst. Effect of parameters such as temperature (323-353 K), catalyst loading (0-8.5%w/w), alcohol to acid ratio, M (2-6), ultrasound power (0-145 W), duty cycle (0-85%) and amount of molecular sieves added (0-11%w/w) on the rate of reaction was studied. At optimized parameters, a maximum conversion of 91.64% was obtained in 120 min in presence of ultrasound. Experimental kinetic data were correlated by using Eley-Rideal (ER) and Langmuir-Hinshelwood-Hougen-Watson (LHH W) models taking into account reverse reaction. Studies showed that single site LHHW with reactants and products both adsorbing on catalyst surface was most suited for the obtained experimental data. Activation energy determined based on heterogeneous kinetics was in the range 49.31-57.54 kJ/mol while it was 18.29 kJ/mol using homogeneous model.
在超声辐照等温间歇反应器中,以酸性离子交换树脂(Amberlyst-15)为催化剂,研究了丁酸与甲醇的超声辅助酯化反应。考察了温度(323 - 353 K)、催化剂负载量(0 - 8.5%w/w)、醇酸比M(2 - 6)、超声功率(0 - 145 W)、占空比(0 - 85%)以及添加分子筛量(0 - 11%w/w)等参数对反应速率的影响。在优化参数下,超声作用120分钟时最大转化率达到91.64%。考虑到逆反应,利用Eley-Rideal(ER)模型和Langmuir-Hinshelwood-Hougen-Watson(LHHW)模型对实验动力学数据进行关联。研究表明,反应物和产物均吸附在催化剂表面的单中心LHHW模型最适合所获得的实验数据。基于非均相动力学测定的活化能在49.31 - 57.54 kJ/mol范围内,而使用均相模型时活化能为18.29 kJ/mol。