†National Key Laboratory of Biochemical Engineering, Institute of Process Engineering, Chinese Academy of Sciences, Beijing 100190, China.
‡Department of Bioproducts and Biosystems Engineering and Biotechnology Institute, University of Minnesota, St. Paul, Minnesota 55108, United States.
ACS Nano. 2015;9(4):4600-10. doi: 10.1021/acsnano.5b01278. Epub 2015 Apr 13.
Enzymatic conversion of carbon dioxide (CO2) to fuel or chemicals is appealing, but is limited by lack of efficient technology for regeneration and reuse of expensive cofactors. Here we show that cationic polyelectrolyte-doped hollow nanofibers, which can be fabricated via a facile coaxial electrospinning technology, provide an ideal scaffold for assembly of cofactor and multienzymes capable of synthesizing methanol from CO2 through a cascade multistep reaction involving cofactor regeneration. Cofactor and four enzymes including formate, formaldehyde, alcohol, and glutamate dehydrogenases were in situ coencapsulated inside the lumen of hollow nanofibers by involving them in the core-phase solution for coaxial electrospinning, in which cationic polyelectrolyte was predissolved. The polyelectrolyte penetrating across the shell of the hollow nanofibers enabled efficient tethering and retention of cofactor inside the lumen via ion-exchange interactions between oppositely charged polyelectrolytes and cofactor. With carbonic anhydrase assembled on the outer surface of the hollow nanofibers for accelerating hydration of CO2, these five-enzymes-cofactor catalyst system exhibited high activity for methanol synthesis. Compared with methanol yield of only 36.17% using free enzymes and cofactor, the hollow nanofiber-supported system afforded a high value up to 103.2%, the highest reported value so far. It was believed that the linear polyelectrolytes acted as spacers to enhance the shuttling of cofactor between enzymes that were coencapsulated within near vicinity, thus improving the efficiency of the system. The immobilized system showed good stability in reusing. About 80% of its original productivity was retained after 10 reusing cycles, with a cofactor-based cumulative methanol yield reached 940.5%.
将二氧化碳(CO2)转化为燃料或化学品的酶促转化方法很有吸引力,但受到缺乏有效技术来再生和再利用昂贵辅因子的限制。在这里,我们展示了通过简单的同轴静电纺丝技术制造的阳离子聚电解质掺杂的中空纳米纤维为组装辅因子和多酶提供了理想的支架,这些多酶能够通过涉及辅因子再生的级联多步反应将 CO2 合成为甲醇。辅因子和包括甲酸、甲醛、醇和谷氨酸脱氢酶在内的四种酶通过将它们包含在同轴静电纺丝的芯相溶液中而原位共包封在中空纳米纤维的内腔中,其中阳离子聚电解质预先溶解。聚电解质穿透中空纳米纤维的壳,通过带相反电荷的聚电解质与辅因子之间的离子交换相互作用,有效地将辅因子固定和保留在内腔中。碳酸酐酶组装在中空纳米纤维的外表面上以加速 CO2 的水合作用,这些五酶-辅因子催化剂体系表现出很高的甲醇合成活性。与使用游离酶和辅因子仅获得 36.17%甲醇产率相比,中空纳米纤维负载的体系提供了高达 103.2%的高值,这是迄今为止报道的最高值。据信,线性聚电解质起到间隔物的作用,以增强在近邻共包封的酶之间穿梭的辅因子的效率,从而提高了体系的效率。固定化体系在重复使用中表现出良好的稳定性。在 10 次重复使用循环后,其原始生产力保留了约 80%,基于辅因子的累积甲醇产率达到 940.5%。