Suppr超能文献

飞秒激光直写具有高稳定性和低泵浦阈值的单模聚合物微环激光器

Femtosecond laser direct writing of single mode polymer micro ring laser with high stability and low pumping threshold.

作者信息

Parsanasab Gholam-Mohammad, Moshkani Mojtaba, Gharavi Alireza

出版信息

Opt Express. 2015 Apr 6;23(7):8310-6. doi: 10.1364/OE.23.008310.

Abstract

We have demonstrated an optically pumped polymer microring laser fabricated by two photon polymerization (TPP) of SU-8. The gain medium is an organic dye (Rhodamine B) doped in SU-8, and the laser cavity is a double coupled microring structure. Single mode lasing was obtained from the two coupled rings each with 30 µm and 29 µm radii using Vernier effect. Low laser threshold of 0.4 µJ/mm(2) is achieved using 1 µm wide polymer waveguides and the quality factor is greater than 10(4) at 612.4 nm wavelength. The lasing remained stable with pump energies from threshold to energies as high as 125 times the threshold.

摘要

我们展示了一种通过SU-8的双光子聚合(TPP)制造的光泵浦聚合物微环激光器。增益介质是掺杂在SU-8中的有机染料(罗丹明B),激光腔是双耦合微环结构。利用游标效应,从两个半径分别为30 µm和29 µm的耦合环中获得了单模激光。使用1 µm宽的聚合物波导实现了0.4 µJ/mm(2)的低激光阈值,并且在612.4 nm波长处品质因数大于10(4)。从阈值到高达阈值125倍的泵浦能量范围内,激光发射保持稳定。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验