Suppr超能文献

韩牛一岁龄体重、胴体性状及主要切块产量的遗传参数。

Genetic parameters for yearling weight, carcass traits, and primal-cut yields of Hanwoo cattle.

作者信息

Choi T J, Alam M, Cho C I, Lee J G, Park B, Kim S, Koo Y, Roh S H

出版信息

J Anim Sci. 2015 Apr;93(4):1511-21. doi: 10.2527/jas.2014-7953.

Abstract

Genetic parameters associated with yearling weight, carcass traits, and primal-cut yields of male Hanwoo cattle were investigated using univariate and bivariate animal models. The mean yearling weight (YWT), carcass weight (CWT), longissimus muscle area (LMA), backfat thickness (BFT), and marbling score (MS) were 352.47 ± 0.40 kg, 337.39 ± 0.64 kg, 78.28 ± 0.13 cm2, 8.45 ± 0.05 mm, and 3.25 ± 0.03, respectively. Total primal-cut yield (TPC) was 78.95 ± 0.10% of CWT, of which 42.3% was contributed by the forequarters (chuck, CHK; shoulder, SLD; ribs, RIB; and brisket and flank, BAF). Loins, top round (TRND), and round (RND) were associated with yields of 13.57%, 5.45 ± 0.01%, and 8.87 ± 0.02%, respectively. The largest cut studied was ribs (15.67 ± 0.03%). The estimated heritabilities (h2) of YWT, CWT, LMA, BFT, and MS were 0.18 ± 0.02, 0.29 ± 0.04, 0.38 ± 0.05, 0.45 ± 0.05, and 0.62 ± 0.07, respectively. Shoulder yield was highly heritable in Hanwoo steers (0.83 ± 0.13), followed by the yields of round (0.66 ± 0.12), striploin (0.64 ± 0.12), top round (0.62 ± 0.12), sirloin (0.60 ± 0.12), and total primal-cut yield (0.52 ± 0.11). The h2 values of CHK, BAF, RIB, and tenderloin (TLN) ranged from 0.19 ± 0.09 to 0.41 ± 0.11. Generally, the genetic CV was low for most traits (2.33%-6.15%), except for CHK, BFT, and MS. The genetic correlation (rg) was strong between YWT and CWT (0.77 ± 0.06). The greatest positive and negative rg among carcass traits were those between LMA and CWT (0.52 ± 0.08) and between LMA and BFT (-0.30 ± 0.09), respectively. The correlation between CHK and SLD (0.81 ± 0.14), and those between SLD, TLN, TRND, and RND, were mostly strong (0.77-0.87), but the rg between RIB and other traits were strongly negative. The TPC yield showed moderate to high rg with most primal cuts. The YWT, CWT, and LMA correlated notably with CHK, SLD, and loin yields, especially LMA. However, BFT and MS were negatively correlated with many primal cuts but RIB. Those rg estimates were also opposite of that of LMA and CWT with primal cuts. Phenotypic correlations (rp) were generally weaker than rg estimates. The rp of YWT, CWT, and LMA were either zero or moderately negative compared to those of the BFT and MS with primal cuts. Most primal cuts yielded positive rp estimates among them, except for RIB. Our results suggest that direct selection for YWT, various carcass traits, and primal-cut yields may increase the carcass value of Hanwoo males.

摘要

使用单变量和双变量动物模型研究了韩牛公牛一岁体重、胴体性状和主要切块产量的遗传参数。一岁体重(YWT)、胴体重(CWT)、背最长肌面积(LMA)、背膘厚度(BFT)和大理石花纹评分(MS)的平均值分别为352.47±0.40千克、337.39±0.64千克、78.28±0.13平方厘米、8.45±0.05毫米和3.25±0.03。总主要切块产量(TPC)为CWT的78.95±0.10%,其中前躯(肩胛肉、CHK;肩肉、SLD;肋肉、RIB;胸肉和腹肉、BAF)占42.3%。腰肉、上腰部(TRND)和后腿肉(RND)的产量分别为13.57%、5.45±0.01%和8.87±0.02%。研究的最大切块是肋肉(15.67±0.03%)。YWT、CWT、LMA、BFT和MS的估计遗传力(h2)分别为0.18±0.02、0.29±0.04、0.38±0.05、0.45±0.05和0.62±0.07。韩牛阉牛的肩肉产量遗传力很高(0.83±0.13),其次是后腿肉(0.66±0.12)、里脊(0.64±0.12)、上腰部(0.62±0.12)、牛腩(0.60±0.12)和总主要切块产量(0.52±0.11)。CHK、BAF、RIB和里脊(TLN)的h2值在0.19±0.09至0.41±0.11之间。一般来说,除CHK、BFT和MS外,大多数性状的遗传变异系数较低(2.33%-6.15%)。YWT和CWT之间的遗传相关性(rg)很强(0.77±0.06)。胴体性状之间最大的正、负rg分别是LMA和CWT之间(0.52±0.08)以及LMA和BFT之间(-0.30±0.09)。CHK和SLD之间的相关性(0.81±0.14),以及SLD、TLN、TRND和RND之间的相关性大多很强(0.77-0.87),但RIB与其他性状之间的rg为强负相关。TPC产量与大多数主要切块的rg为中度到高度相关。YWT、CWT和LMA与CHK、SLD和腰肉产量显著相关,尤其是LMA。然而,BFT和MS与许多主要切块呈负相关,但与RIB除外。这些rg估计值也与LMA和CWT与主要切块的情况相反。表型相关性(rp)通常比rg估计值弱。与BFT和MS与主要切块的情况相比,YWT、CWT和LMA的rp要么为零,要么为中度负相关。除RIB外,大多数主要切块之间的rp估计值为正。我们的结果表明,对YWT、各种胴体性状和主要切块产量进行直接选择可能会提高韩牛公牛的胴体价值。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验