Suppr超能文献

通过最小加加速度模型分析参考呼吸波形。

Reference respiratory waveforms by minimum jerk model analysis.

作者信息

Anetai Yusuke, Sumida Iori, Takahashi Yutaka, Yagi Masashi, Ota Seiichi, Mizuno Hirokazu, Ogawa Kazuhiko

机构信息

Department of Radiation Oncology, Osaka University Graduate School of Medicine, Yamadaoka 2-2, Suita-shi, Osaka 565-0871, Japan.

Department of Medical Technology, Osaka University Hospital, Yamadaoka 2-15, Suita-shi, Osaka 565-0871, Japan.

出版信息

Med Phys. 2015 Sep;42(9):5066-74. doi: 10.1118/1.4927557.

Abstract

PURPOSE

CyberKnife(®) robotic surgery system has the ability to deliver radiation to a tumor subject to respiratory movements using Synchrony(®) mode with less than 2 mm tracking accuracy. However, rapid and rough motion tracking causes mechanical tracking errors and puts mechanical stress on the robotic joint, leading to unexpected radiation delivery errors. During clinical treatment, patient respiratory motions are much more complicated, suggesting the need for patient-specific modeling of respiratory motion. The purpose of this study was to propose a novel method that provides a reference respiratory wave to enable smooth tracking for each patient.

METHODS

The minimum jerk model, which mathematically derives smoothness by means of jerk, or the third derivative of position and the derivative of acceleration with respect to time that is proportional to the time rate of force changed was introduced to model a patient-specific respiratory motion wave to provide smooth motion tracking using CyberKnife(®). To verify that patient-specific minimum jerk respiratory waves were being tracked smoothly by Synchrony(®) mode, a tracking laser projection from CyberKnife(®) was optically analyzed every 0.1 s using a webcam and a calibrated grid on a motion phantom whose motion was in accordance with three pattern waves (cosine, typical free-breathing, and minimum jerk theoretical wave models) for the clinically relevant superior-inferior directions from six volunteers assessed on the same node of the same isocentric plan.

RESULTS

Tracking discrepancy from the center of the grid to the beam projection was evaluated. The minimum jerk theoretical wave reduced the maximum-peak amplitude of radial tracking discrepancy compared with that of the waveforms modeled by cosine and typical free-breathing model by 22% and 35%, respectively, and provided smooth tracking for radial direction. Motion tracking constancy as indicated by radial tracking discrepancy affected by respiratory phase was improved in the minimum jerk theoretical model by 7.0% and 13% compared with that of the waveforms modeled by cosine and free-breathing model, respectively.

CONCLUSIONS

The minimum jerk theoretical respiratory wave can achieve smooth tracking by CyberKnife(®) and may provide patient-specific respiratory modeling, which may be useful for respiratory training and coaching, as well as quality assurance of the mechanical CyberKnife(®) robotic trajectory.

摘要

目的

射波刀机器人手术系统能够使用同步模式对受呼吸运动影响的肿瘤进行放疗,跟踪精度小于2毫米。然而,快速且粗糙的运动跟踪会导致机械跟踪误差,并给机器人关节施加机械应力,从而导致意外的放疗误差。在临床治疗期间,患者的呼吸运动要复杂得多,这表明需要针对患者进行呼吸运动建模。本研究的目的是提出一种新颖的方法,为每位患者提供参考呼吸波以实现平滑跟踪。

方法

引入最小加加速度模型,该模型通过加加速度(即位置的三阶导数以及加速度相对于时间的导数,与力变化的时间速率成正比)在数学上推导平滑度,以对特定患者的呼吸运动波进行建模,从而使用射波刀实现平滑运动跟踪。为了验证同步模式是否能平稳跟踪特定患者的最小加加速度呼吸波,使用网络摄像头和校准网格,每隔0.1秒对射波刀的跟踪激光投影进行光学分析,该运动体模的运动符合来自六名志愿者在同一等中心计划的同一节点上针对临床相关的上下方向的三种模式波(余弦波、典型自由呼吸波和最小加加速度理论波模型)。

结果

评估了从网格中心到光束投影的跟踪差异。与余弦波和典型自由呼吸模型建模的波形相比,最小加加速度理论波分别将径向跟踪差异的最大峰值幅度降低了22%和35%,并为径向方向提供了平滑跟踪。与余弦波和自由呼吸模型建模的波形相比,最小加加速度理论模型中受呼吸相位影响的径向跟踪差异所表明的运动跟踪稳定性分别提高了7.0%和13%。

结论

最小加加速度理论呼吸波可通过射波刀实现平滑跟踪,并可为患者提供特定的呼吸建模,这可能对呼吸训练和指导以及射波刀机器人机械轨迹的质量保证有用。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验