School of Environmental Science and Engineering, Zhejiang Gongshang University, Hangzhou 310035, China.
Zhejiang Provincial Key Laboratory of Health Risk Appraisal for Trace Toxic Chemicals, Ningbo Municipal Center for Disease Control and Prevention, Ningbo 315010, China; Ningbo Key Laboratory of Poison Research and Control, Ningbo Municipal Center for Disease Control and Prevention, Ningbo 315010, China.
Ultrason Sonochem. 2016 Jan;28:302-310. doi: 10.1016/j.ultsonch.2015.08.001. Epub 2015 Aug 6.
The present work demonstrates the application of the combination of hydrodynamic cavitation (HC) and the heterogeneous Fenton process (HF, Fe(0)/H2O2) for the decolorization of azo dye Orange G (OG). The effects of main affecting operation conditions such as the inlet fluid pressure, initial concentration of OG, H2O2 and zero valent iron (ZVI), the fixed position of ZVI, and medium pH on decolorization efficiency were discussed with guidelines for selection of optimum parameters. The results revealed that the acidic conditions are preferred for OG decolorizaiton. The decolorization rate increased with increasing H2O2 and ZVI concentration and decreased with increasing OG initial concentration. Besides, the decolorization rate was strongly dependent on the fixed position of ZVI. The analysis results of degradation products using liquid chromatography-ESI-TOF mass spectrometry revealed that the degradation mechanism of OG proceeds mainly via reductive cleavage of the azo linkage due to the attack of hydroxyl radical. The present work has conclusively established that the combination of HC and HF can be more energy efficient and gives higher decolorization rate of OG as compared with HC and HF alone.
本工作展示了水力空化(HC)与非均相芬顿工艺(HF,Fe(0)/H2O2)相结合在偶氮染料橙 G(OG)脱色中的应用。讨论了主要影响操作条件,如入口流体压力、OG 的初始浓度、H2O2 和零价铁(ZVI)、ZVI 的固定位置以及介质 pH 对脱色效率的影响,并给出了选择最佳参数的指南。结果表明,酸性条件有利于 OG 的脱色。脱色率随 H2O2 和 ZVI 浓度的增加而增加,随 OG 初始浓度的增加而降低。此外,脱色率强烈依赖于 ZVI 的固定位置。使用液相色谱-ESI-TOF 质谱对降解产物的分析结果表明,由于羟基自由基的攻击,OG 的降解机制主要通过偶氮键的还原断裂进行。本工作明确证实,与单独的 HC 和 HF 相比,HC 和 HF 的结合可以更节能,并获得更高的 OG 脱色率。