Leary Ryan P, Manuel Cyrus T, Shamouelian David, Protsenko Dmitriy E, Wong Brian J F
Beckman Laser Institute and Medical Clinic, Irvine, California 2Department of Otolaryngology, University of California, Irvine, School of Medicine, Irvine3currently with Department of Otorhinolaryngology, Montefiore Medical Center, Bronx, New York.
Beckman Laser Institute and Medical Clinic, Irvine, California.
JAMA Facial Plast Surg. 2015 Nov-Dec;17(6):413-20. doi: 10.1001/jamafacial.2015.0941.
Alar rim retraction is the most common unintended consequence of tissue remodeling that results from overresection of the cephalic lateral crural cartilage; however, the complex tissue remodeling process that produces this shape change is not well understood.
To simulate how resection of cephalic trim alters the stress distribution within the human nose in response to tip depression (palpation) and to simulate the internal forces generated after cephalic trim that may lead to alar rim retraction cephalically and upward rotation of the nasal tip.
DESIGN, SETTING, AND PARTICIPANTS: A multicomponent finite element model was derived from maxillofacial computed tomography with 1-mm axial resolution. The 3-dimensional editing function in the medical imaging software was used to trim the cephalic portion of the lower lateral cartilage to emulate that performed in typical rhinoplasty. Three models were created: a control, a conservative trim, and an aggressive trim. Each simulated model was imported to a software program that performs mechanical simulations, and material properties were assigned. First, nasal tip depression (palpation) was simulated, and the resulting stress distribution was calculated for each model. Second, long-term tissue migration was simulated on conservative and aggressive trim models by placing normal and shear force vectors along the caudal and cephalic borders of the tissue defect.
The von Mises stress distribution created by a 5-mm tip depression revealed consistent findings among all 3 simulations, with regions of high stress being concentrated to the medial portion of the intermediate crus and the caudal septum. Nasal tip reaction force marginally decreased as more lower lateral cartilage tissue was resected. Conservative and aggressive cephalic trim models produced some degree of alar rim retraction and tip rotation, which increased with the magnitude of the force applied to the region of the tissue defect.
Cephalic trim was performed on a computerized composite model of the human nose to simulate conservative and aggressive trims. Internal forces were applied to each model to emulate the tissue migration that results from decades of wound healing. Our simulations reveal that the degree of tip rotation and alar rim retraction is dependent on the amount of cartilage that was resected owing to cephalic trim. Tip reaction force is marginally reduced with increasing tissue volume resection.
NA.
鼻翼缘退缩是因过度切除鼻外侧软骨头部而导致的组织重塑最常见的意外后果;然而,产生这种形状变化的复杂组织重塑过程尚未得到充分理解。
模拟鼻头部修剪如何响应鼻尖下压(触诊)改变人鼻内的应力分布,并模拟鼻头部修剪后可能导致鼻翼缘向头侧退缩和鼻尖向上旋转所产生的内力。
设计、设置和参与者:一个多组件有限元模型由轴向分辨率为1毫米的颌面计算机断层扫描得出。医学成像软件中的三维编辑功能用于修剪下外侧软骨的鼻头部,以模拟典型鼻整形术中的操作。创建了三个模型:一个对照模型、一个保守修剪模型和一个激进修剪模型。每个模拟模型被导入到一个执行力学模拟的软件程序中,并赋予材料属性。首先,模拟鼻尖下压(触诊),并计算每个模型产生的应力分布。其次,通过沿组织缺损的尾侧和头侧边界放置法向力和剪切力矢量,在保守和激进修剪模型上模拟长期组织迁移。
5毫米鼻尖下压产生的冯·米塞斯应力分布在所有三个模拟中显示出一致的结果,高应力区域集中在中间脚的内侧部分和鼻中隔尾侧。随着更多下外侧软骨组织被切除,鼻尖反作用力略有下降。保守和激进的鼻头部修剪模型产生了一定程度的鼻翼缘退缩和鼻尖旋转,且随着施加到组织缺损区域的力的大小增加而增加。
在人鼻的计算机化复合模型上进行鼻头部修剪,以模拟保守和激进修剪。对每个模型施加内力以模拟数十年伤口愈合导致的组织迁移。我们的模拟表明,鼻尖旋转和鼻翼缘退缩的程度取决于因鼻头部修剪而切除的软骨量。随着组织切除量的增加,鼻尖反作用力略有降低。
无。