Tjoa Tjoson, Manuel Cyrus T, Leary Ryan P, Harb Rani, Protsenko Dmitriy E, Wong Brian J F
Department of Otolaryngology, Massachusetts Eye & Ear Infirmary, Boston.
Beckman Laser Institute, University of California, Irvine.
JAMA Facial Plast Surg. 2016 Mar-Apr;18(2):136-43. doi: 10.1001/jamafacial.2015.1954.
Computational modeling can be used to mimic the forces acting on the nasal framework that lead to the inverted-V deformity (IVD) after surgery and potentially determine long-range outcomes.
To demonstrate the use of the finite element method (FEM) to predict the formation of the IVD after separation of the upper lateral cartilages (ULCs) from the nasal septum.
DESIGN, SETTING, AND PARTICIPANTS: A computer model of a nose was derived from human computed tomographic data. The septum and upper and lower lateral cartilages were designed to fit within the soft-tissue envelope using computer-aided design software. Mechanical properties were obtained from the literature. The 3 simulations created included (1) partial fusion of the ULCs to the septum, (2) separation of the ULCs from the septum, and (3) a fully connected model to serve as a control. Forces caused by wound healing were prescribed at the junction of the disarticulated ULCs and septum. Using FEM software, equilibrium stress and strain were calculated. Displacement of the soft tissue along the nasal dorsum was measured and evaluated for evidence of morphologic change consistent with the IVD.
Morphologic changes on the computer models in response to each simulation.
When a posteroinferior force vector was applied along the nasal dorsum, the areas of highest stress were along the medial edge of the ULCs and at the junction of the ULCs and the nasal bones. With full detachment of ULCs and the dorsal septum, the characteristic IVD was observed. Both separation FEMs produced a peak depression of 0.3 mm along the nasal dorsum.
The FEM can be used to simulate the long-term structural complications of a surgical maneuver in rhinoplasty, such as the IVD. When applied to other rhinoplasty maneuvers, the use of FEMs may be useful to simulate the long-term outcomes, particularly when long-term clinical results are not available. In the future, use of FEMs may simulate rhinoplasty results beyond simply morphing the outer contours of the nose and allow estimation of potentially long-term clinical outcomes that may not be readily apparent.
NA.
计算建模可用于模拟作用于鼻支架的力,这些力会导致术后出现倒V形畸形(IVD),并有可能确定远期结果。
演示使用有限元方法(FEM)预测上外侧软骨(ULC)与鼻中隔分离后IVD的形成。
设计、设置和参与者:从人体计算机断层扫描数据中获取鼻子的计算机模型。使用计算机辅助设计软件将鼻中隔以及上、下外侧软骨设计为适合软组织包膜。力学性能从文献中获取。创建的3种模拟包括:(1)ULC与鼻中隔部分融合;(2)ULC与鼻中隔分离;(3)一个完全连接的模型作为对照。在分离的ULC与鼻中隔的连接处规定伤口愈合引起的力。使用有限元软件计算平衡应力和应变。测量并评估鼻背软组织的位移,以寻找与IVD一致的形态学变化证据。
每种模拟后计算机模型上的形态学变化。
当沿着鼻背施加后下力向量时,应力最高的区域位于ULC的内侧边缘以及ULC与鼻骨的连接处。随着ULC与鼻中隔背侧完全分离,观察到特征性的IVD。两种分离有限元模型在鼻背均产生了0.3mm的峰值凹陷。
有限元方法可用于模拟鼻整形手术操作的长期结构并发症,如IVD。当应用于其他鼻整形手术操作时,有限元方法可能有助于模拟长期结果,尤其是在没有长期临床结果的情况下。未来,有限元方法的使用可能不仅能模拟鼻整形手术结果,还能超越简单地改变鼻子的外部轮廓,并估计可能不太明显的潜在长期临床结果。
无。