Vlassakis Julea, Herr Amy E
Department of Bioengineering and The UC Berkeley/UCSF Graduate Program in Bioengineering, University of California Berkeley , Berkeley, California 94720, United States.
Anal Chem. 2015 Nov 3;87(21):11030-8. doi: 10.1021/acs.analchem.5b03032. Epub 2015 Oct 22.
Applications as diverse as drug delivery and immunoassays require hydrogels to house high concentration macromolecular solutions. Yet, thermodynamic partitioning acts to lower the equilibrium concentration of macromolecules in the hydrogel, as compared to the surrounding liquid phase. For immunoassays that utilize a target antigen immobilized in the hydrogel, partitioning hinders introduction of detection antibody into the gel and, consequently, reduces the in-gel concentration of detection antibody, adversely impacting assay sensitivity. Recently, we developed a single-cell targeted proteomic assay with polyacrylamide gel electrophoresis of single cell lysates followed by an in-gel immunoassay. In the present work, we overcome partitioning that both limits analytical sensitivity and increases consumption of costly detection antibody by performing the immunoassay step after dehydrating the antigen-containing polyacrylamide gel. Gels are rehydrated with a solution of detection antibody. We hypothesized that matching the volume of detection antibody solution with the hydrogel water volume fraction would ensure that, at equilibrium, the detection antibody mass resides in the gel and not in the liquid surrounding the gel. Using this approach, we observe (compared with antibody incubation of hydrated gels): (i) 4-11 fold higher concentration of antibody in the dehydrated gels and in the single-cell assay (ii) higher fluorescence immunoassay signal, with up to 5-fold increases in signal-to-noise-ratio and (iii) reduced detection antibody consumption. We also find that detection antibody signal may be less well-correlated with target protein levels (GFP) using this method, suggesting a trade-off between analytical sensitivity and variation in immunoprobe signal. Our volume-matching approach for introducing macromolecular solutions to hydrogels increases the local in-gel concentration of detection antibody without requiring modification of the hydrogel structure, and thus we anticipate broad applicability to hydrogel-based assays, diagnostics, and drug delivery.
从药物递送和免疫分析等多种应用都需要水凝胶来容纳高浓度的大分子溶液。然而,与周围液相相比,热力学分配作用会降低水凝胶中大分子的平衡浓度。对于利用固定在水凝胶中的靶抗原的免疫分析,分配作用会阻碍检测抗体进入凝胶,从而降低凝胶中检测抗体的浓度,对分析灵敏度产生不利影响。最近,我们开发了一种单细胞靶向蛋白质组学分析方法,即对单细胞裂解物进行聚丙烯酰胺凝胶电泳,随后进行凝胶内免疫分析。在本工作中,我们通过在含抗原的聚丙烯酰胺凝胶脱水后进行免疫分析步骤,克服了既限制分析灵敏度又增加昂贵检测抗体消耗的分配问题。凝胶用检测抗体溶液重新水化。我们假设使检测抗体溶液的体积与水凝胶的水体积分数相匹配将确保在平衡时,检测抗体质量存在于凝胶中而非凝胶周围的液体中。使用这种方法,我们观察到(与水合凝胶的抗体孵育相比):(i)脱水凝胶和单细胞分析中抗体浓度高4 - 11倍;(ii)荧光免疫分析信号更高,信噪比提高达5倍;(iii)检测抗体消耗减少。我们还发现使用这种方法检测抗体信号与靶蛋白水平(绿色荧光蛋白)的相关性可能较差,这表明在分析灵敏度和免疫探针信号变化之间存在权衡。我们将大分子溶液引入水凝胶的体积匹配方法提高了凝胶内检测抗体的局部浓度,而无需修改水凝胶结构,因此我们预计该方法在基于水凝胶的分析、诊断和药物递送中具有广泛的适用性。