Chen Jianyong, Carter Richard M, Thomson Robert R, Hand Duncan P
Opt Express. 2015 Oct 19;23(21):28104-5. doi: 10.1364/OE.23.028104.
The results presented in Fig. 8 were incorrect; the growth in the weld structure presented was due to the laser taking 3 ms to reach full power. Here we present a corrected version of the figure and associated discussion. It should be noted that this affects only the exact number of pulses required to form the weld structure and some of the low pulse number observations. This does not therefore affect the theory presented in the paper. In addition Fig. 9 and Fig. 10 were reversed in the published version. The correct figures are presented below.
图8中呈现的结果有误；所呈现的焊接结构中的生长是由于激光需要3毫秒才能达到全功率。在此，我们给出该图的修正版本及相关讨论。应当注意的是，这仅影响形成焊接结构所需的脉冲的确切数量以及一些低脉冲数的观测结果。因此，这并不影响论文中所阐述的理论。此外，已发表版本中的图9和图10颠倒了。正确的图如下所示。
