Suppr超能文献

使用动力学蒙特卡罗模拟法测定水在含碳纳米管的聚甲基丙烯酸甲酯膜中的有效扩散系数。

Determination of the effective diffusivity of water in a poly (methyl methacrylate) membrane containing carbon nanotubes using kinetic Monte Carlo simulations.

作者信息

Mermigkis Panagiotis G, Tsalikis Dimitrios G, Mavrantzas Vlasis G

机构信息

Department of Chemical Engineering, University of Patras, GR 26500 Patras, Greece.

出版信息

J Chem Phys. 2015 Oct 28;143(16):164903. doi: 10.1063/1.4934225.

Abstract

A kinetic Monte Carlo (kMC) simulation algorithm is developed for computing the effective diffusivity of water molecules in a poly(methyl methacrylate) (PMMA) matrix containing carbon nanotubes (CNTs) at several loadings. The simulations are conducted on a cubic lattice to the bonds of which rate constants are assigned governing the elementary jump events of water molecules from one lattice site to another. Lattice sites belonging to PMMA domains of the membrane are assigned different rates than lattice sites belonging to CNT domains. Values of these two rate constants are extracted from available numerical data for water diffusivity within a PMMA matrix and a CNT pre-computed on the basis of independent atomistic molecular dynamics simulations, which show that water diffusivity in CNTs is 3 orders of magnitude faster than in PMMA. Our discrete-space, continuum-time kMC simulation results for several PMMA-CNT nanocomposite membranes (characterized by different values of CNT length L and diameter D and by different loadings of the matrix in CNTs) demonstrate that the overall or effective diffusivity, D(eff), of water in the entire polymeric membrane is of the same order of magnitude as its diffusivity in PMMA domains and increases only linearly with the concentration C (vol. %) in nanotubes. For a constant value of the concentration C, D(eff) is found to vary practically linearly also with the CNT aspect ratio L/D. The kMC data allow us to propose a simple bilinear expression for D(eff) as a function of C and L/D that can describe the numerical data for water mobility in the membrane extremely accurately. Additional simulations with two different CNT configurations (completely random versus aligned) show that CNT orientation in the polymeric matrix has only a minor effect on D(eff) (as long as CNTs do not fully penetrate the membrane). We have also extensively analyzed and quantified sublinear (anomalous) diffusive phenomena over small to moderate times and correlated them with the time needed for penetrant water molecules to explore the available large, fast-diffusing CNT pores before Fickian diffusion is reached.

摘要

开发了一种动力学蒙特卡罗(kMC)模拟算法,用于计算在含有不同负载量碳纳米管(CNT)的聚甲基丙烯酸甲酯(PMMA)基质中水分子的有效扩散率。模拟在立方晶格上进行,为晶格键分配速率常数,以控制水分子从一个晶格位置到另一个晶格位置的基本跳跃事件。属于膜的PMMA域的晶格位置被赋予与属于CNT域的晶格位置不同的速率。这两个速率常数的值是从PMMA基质内水扩散率的现有数值数据以及基于独立原子分子动力学模拟预先计算的CNT中提取的,结果表明CNT中的水扩散率比PMMA中的快3个数量级。我们对几种PMMA-CNT纳米复合膜(由不同的CNT长度L和直径D值以及CNT中基质的不同负载量表征)进行的离散空间、连续时间kMC模拟结果表明,整个聚合物膜中水的总体或有效扩散率D(eff)与其在PMMA域中的扩散率处于同一数量级,并且仅随纳米管中的浓度C(体积%)线性增加。对于浓度C的恒定值,发现D(eff)实际上也随CNT长径比L/D线性变化。kMC数据使我们能够提出一个简单的双线性表达式,将D(eff)表示为C和L/D的函数,该表达式可以极其准确地描述膜中水迁移率的数值数据。对两种不同CNT构型(完全随机与排列)的额外模拟表明,聚合物基质中CNT的取向对D(eff)只有微小影响(只要CNT没有完全穿透膜)。我们还广泛分析和量化了在小到中等时间内的亚线性(异常)扩散现象,并将它们与渗透水分子在达到菲克扩散之前探索可用的大的、快速扩散的CNT孔所需的时间相关联。

文献检索

告别复杂PubMed语法,用中文像聊天一样搜索,搜遍4000万医学文献。AI智能推荐,让科研检索更轻松。

立即免费搜索

文件翻译

保留排版,准确专业,支持PDF/Word/PPT等文件格式,支持 12+语言互译。

免费翻译文档

深度研究

AI帮你快速写综述,25分钟生成高质量综述,智能提取关键信息,辅助科研写作。

立即免费体验