Zhang F N, Hu H S, Zhang T K, Jia Q G, Wang D M, Jia J
School of Energy and Power Engineering, Xi'an Jiaotong University, Xi'an 710049, China.
Laser Fusion Research Center, CAEP, Mianyang, 621900 Sichuan, China.
Rev Sci Instrum. 2015 Dec;86(12):123515. doi: 10.1063/1.4939034.
Aperture alignment is crucial for the diagnosis of neutron imaging because it has significant impact on the coding imaging and the understanding of the neutron source. In our previous studies on the neutron imaging system with coded aperture for large field of view, "residual watermark," certain extra information that overlies reconstructed image and has nothing to do with the source is discovered if the peak normalization is employed in genetic algorithms (GA) to reconstruct the source image. Some studies on basic properties of residual watermark indicate that the residual watermark can characterize coded aperture and can thus be used to determine the location of coded aperture relative to the system axis. In this paper, we have further analyzed the essential conditions for the existence of residual watermark and the requirements of the reconstruction algorithm for the emergence of residual watermark. A gamma coded imaging experiment has been performed to verify the existence of residual watermark. Based on the residual watermark, a correction method for the aperture misalignment has been studied. A multiple linear regression model of the position of coded aperture axis, the position of residual watermark center, and the gray barycenter of neutron source with twenty training samples has been set up. Using the regression model and verification samples, we have found the position of the coded aperture axis relative to the system axis with an accuracy of approximately 20 μm. Conclusively, a novel approach has been established to correct the coded aperture misalignment for fast neutron coded imaging.
孔径对准对于中子成像诊断至关重要,因为它对编码成像和中子源的理解有重大影响。在我们之前关于大视场编码孔径中子成像系统的研究中,如果在遗传算法(GA)中采用峰值归一化来重建源图像,会发现“残留水印”,即在重建图像上叠加的与源无关的某些额外信息。一些关于残留水印基本特性的研究表明,残留水印可以表征编码孔径,因此可用于确定编码孔径相对于系统轴的位置。在本文中,我们进一步分析了残留水印存在的必要条件以及重建算法对残留水印出现的要求。进行了伽马编码成像实验以验证残留水印的存在。基于残留水印,研究了一种孔径对准误差的校正方法。利用二十个训练样本建立了编码孔径轴位置、残留水印中心位置和中子源灰度重心的多元线性回归模型。使用回归模型和验证样本,我们以约20μm的精度找到了编码孔径轴相对于系统轴的位置。总之,已经建立了一种新方法来校正快中子编码成像中的编码孔径对准误差。