Suppr超能文献

[脊柱侧弯病例中使用的个性化钻孔导向模板准确性和安全性的病例对照研究]

[Case-control study on accuracy and safety of patient-specific drill-guide templates used in scoliosis cases].

作者信息

Zhang Yu-peng, Shi Ya-min, Wang Hua-dong, Hou Shu-xun

出版信息

Zhongguo Gu Shang. 2015 Oct;28(10):945-50.

Abstract

OBJECTIVE

To evaluate the accuracy and safety of pedicle screw insertion with the aid of novel patient-specific drill-guide templates in scoliosis cases.

METHODS

Ten patients with scoliosis were selected to participate in the research (the observation group) from December 2013 to December 2014. The data was obtained from CT scanning, and put into the computer to perform reconstruction of spine, simulation of pedicle screw insertion, and design of patient-specific drill-guide templates with software. The templates were made with rapid prototyping technique. After sterilization, the templates were used to aid the pedicle screw insertion intraoperatively. The blood loss, operation duration, change of creatinine level pre- and post-operation, and complications related to pedicle screw insertion were recorded. The location of pedicle screws were graded so as to evaluate the accuracy. A comparative study was then performed with the data of ten scoliosis cases operated with free-hand method during the same period (control group). There were 5 cases of idiopathic scoliosis and 5 cases of congenital scoliosis in the observation group, including 3 males and 7 females. Their average age was 11.9 years old (ranged, 4 to 18 years old), and the average Cobb angle of main curve was 54.9° (ranged, 42.1° to 78.4°). There were also 5 cases of idiopathic scoliosis and 5 cases of congenital scoliosis in the control group,including 2 males and 8 females. Their average age was 12.6 years old (ranged, 6 to 17 years old), and the average Cobb angle of main curve was 56.6° (ranged, 38.2° to 93.4°).

RESULTS

A total of 167 pedicle screws were inserted intraoperatively, with 138 screws (82.6%) in grade I, 26 screws (15.0%) in grade II, 4 screws in grade III (2.4%), but no screws in grade IV according to the CT image. There were 29 (17.4%) screws perforated, and 163 (97.6%) screws could be accepted. In the control group, a total of 165 pedicle screws were inserted intraoperatively, with 98 screws (59.4%) in grade I, 39 screws (23.6%) in grade II, 21 screws in grade III (12.7%), and 7 screws in grade IV (4.2%). There were 67 (40.6%) screws perforated, and 137 (83.0%) screws could be accepted. The grade distribution of screw position, ratio of perforated and accepted screws were significantly different between the two groups respectively (Z=-5.013, P=0.000; χ2=9.347, P=0.002; χ2=20.242, P=0.000). The correction rate of Cobb angle were (74.1±10.0)% vs (69.7±17.6)%; blood loss were (455±447) ml vs (415±389) ml; operation duration were (163.5±53.7) min vs (164.0±48.7) min; and the changes of creatinine level pre- and post-operatively were (-5.3±3.2) μmol/L vs (-3.4±3.1) μmol/L; all above data had no significant differences respectively (t=0.696, P=0.496; t=0.214, P=0.833; t=0.022, P=0.983; t=1.375, P=0.192). There were no complications related to pedicle screw insertion in each group.

CONCLUSION

The novel patient-specific drill guide template can be used to assist the insertion of pedicle screws in scoliosis cases with much higher accuracy than that of freehand method and fair safety.

摘要

目的

评估在脊柱侧弯病例中借助新型个体化钻孔导向模板置入椎弓根螺钉的准确性和安全性。

方法

选取2013年12月至2014年12月间10例脊柱侧弯患者参与研究(观察组)。通过CT扫描获取数据,将其输入计算机,利用软件进行脊柱重建、椎弓根螺钉置入模拟以及个体化钻孔导向模板设计。采用快速成型技术制作模板。消毒后,术中使用模板辅助置入椎弓根螺钉。记录术中出血量、手术时长、术前及术后肌酐水平变化以及与椎弓根螺钉置入相关的并发症。根据CT图像对椎弓根螺钉位置进行分级以评估准确性。随后与同期10例采用徒手方法手术的脊柱侧弯病例数据(对照组)进行对比研究。观察组中特发性脊柱侧弯5例,先天性脊柱侧弯5例,其中男性3例,女性7例。平均年龄11.9岁(范围4至18岁),主弯平均Cobb角54.9°(范围42.1°至78.4°)。对照组中特发性脊柱侧弯5例,先天性脊柱侧弯5例,其中男性2例,女性8例。平均年龄12.6岁(范围6至17岁),主弯平均Cobb角56.6°(范围38.2°至93.4°)。

结果

术中共置入167枚椎弓根螺钉,根据CT图像,I级螺钉138枚(82.6%),II级螺钉26枚(15.0%),III级螺钉4枚(2.4%),无IV级螺钉。有29枚(17.4%)螺钉穿孔,163枚(97.6%)螺钉可接受。对照组术中共置入165枚椎弓根螺钉,I级螺钉98枚(59.4%),II级螺钉39枚(23.6%),III级螺钉21枚(12.7%),IV级螺钉7枚(4.2%)。有67枚(40.6%)螺钉穿孔,137枚(83.0%)螺钉可接受。两组螺钉位置分级分布、穿孔与可接受螺钉比例差异均有统计学意义(Z = -5.013,P = 0.000;χ² = 9.347,P = 0.002;χ² = 20.242,P = 0.000)。Cobb角矫正率分别为(74.1±10.0)%对(69.7±17.6)%;出血量分别为(455±447)ml对(415±389)ml;手术时长分别为(163.5±53.7)分钟对(164.0±48.7)分钟;术前及术后肌酐水平变化分别为(-5.3±3.2)μmol/L对(-3.4±3.1)μmol/L;上述数据差异均无统计学意义(t = 0.696,P = 0.496;t = 0.214,P = 0.833;t = 0.022,P = 0.983;t = 1.375,P = 0.192)。每组均无与椎弓根螺钉置入相关的并发症。

结论

新型个体化钻孔导向模板可用于辅助脊柱侧弯病例中椎弓根螺钉的置入,其准确性远高于徒手方法,安全性良好。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验