Suppr超能文献

不同类型层状材料的拉曼光谱综述。

Review on the Raman spectroscopy of different types of layered materials.

作者信息

Zhang Xin, Tan Qing-Hai, Wu Jiang-Bin, Shi Wei, Tan Ping-Heng

机构信息

State Key Laboratory of Superlattices and Microstructures, Institute of Semiconductors, Chinese Academy of Sciences, Beijing 100083, China.

出版信息

Nanoscale. 2016 Mar 28;8(12):6435-50. doi: 10.1039/c5nr07205k.

Abstract

Two-dimensional layered materials, such as graphene and transition metal dichalcogenides (TMDs), have been under intensive investigation. The rapid progress of research on graphene and TMDs is now stimulating the exploration of different types of layered materials (LMs). Raman spectroscopy has shown its great potential in the characterization of layer numbers, interlayer coupling and layer-stacking configurations and will benefit the future explorations of other LMs. Lattice vibrations or Raman spectra of many LMs in bulk have been discussed since the 1960s. However, different results were obtained because of differences or limitations in the Raman instruments at early stages. The developments of modern Raman spectroscopy now allow us to revisit the Raman spectra of these LMs under the same experimental conditions. Moreover, to the best of our knowledge, there were limitations in detailed reviews on the Raman spectra of these different LMs. Here, we provide a review on Raman spectra of various LMs, including semiconductors, topological insulators, insulators, semi-metals and superconductors. We firstly introduce a unified method based on symmetry analysis and polarization measurements to assign the observed Raman modes and characterize the crystal structure of different types of LMs. Then, we revisit and update the positions and assignments of vibration modes by re-measuring the Raman spectra of different types of LMs and by comparing our results to those reported in previous papers. We apply the recent advances on the interlayer vibrations of graphene and TMDs to these various LMs and obtain their shear modulus. The observation of the shear modes of LMs in bulk facilitates an accurate and fast characterization of layer numbers during preparation processes in the future by a robust layer-number dependency on the frequencies of the shear modes. We also summarize the recent advances on the layer-stacking dependence on the intensities of interlayer shear vibrations. Finally, we review the recent advances on Raman spectroscopy in the characterization of anisotropic LMs, such as black phosphorus and rhenium diselenide. We believe that this review will benefit the future research studies on the fundamental physics and potential applications of these various LMs, particularly when they are reduced down to monolayers or multilayers.

摘要

二维层状材料,如石墨烯和过渡金属二硫属化物(TMDs),一直受到广泛研究。石墨烯和TMDs研究的迅速进展正推动着对不同类型层状材料(LMs)的探索。拉曼光谱在层数、层间耦合和层堆叠构型的表征方面已显示出巨大潜力,并将有益于未来对其他层状材料的探索。自20世纪60年代以来,许多块状层状材料的晶格振动或拉曼光谱已被讨论。然而,由于早期拉曼仪器的差异或局限性,得到了不同的结果。现代拉曼光谱的发展现在使我们能够在相同的实验条件下重新审视这些层状材料的拉曼光谱。此外,据我们所知,对这些不同层状材料的拉曼光谱的详细综述存在局限性。在此,我们对各种层状材料的拉曼光谱进行综述,包括半导体、拓扑绝缘体、绝缘体、半金属和超导体。我们首先介绍一种基于对称性分析和偏振测量的统一方法,以确定观察到的拉曼模式并表征不同类型层状材料的晶体结构。然后,我们通过重新测量不同类型层状材料的拉曼光谱,并将我们的结果与先前论文中报道的结果进行比较,来重新审视和更新振动模式的位置和归属。我们将石墨烯和TMDs层间振动的最新进展应用于这些各种层状材料,并获得它们的剪切模量。对块状层状材料剪切模式的观察有助于未来在制备过程中通过剪切模式频率对层数的稳健依赖性来准确快速地表征层数。我们还总结了层堆叠对层间剪切振动强度依赖性的最新进展。最后,我们综述了拉曼光谱在表征各向异性层状材料(如黑磷和二硒化铼)方面的最新进展。我们相信,这篇综述将有益于未来对这些各种层状材料的基本物理和潜在应用的研究,特别是当它们被缩减为单层或多层时。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验