Kappert H F, Schreck U, Prünte H, Barucha A, Erpelding E, Banholzer M
Dtsch Zahnarztl Z. 1989 Nov;44(11):879-81.
The effects of thermocycling and water penetration on the bond strength of resin-metal-systems and improvements using bonding agents have been tested by shear, bending and tensile tests. After 10,000 cycles within 10 days in different water-baths with 5-37-55 degrees C, there is a decrease in bond strength by 40 to 60%. The use of bonding agents increases the adhesion of the resin to the metal by more than 100%. No significant differences were found between the three bonding agents Silicoater, Sebond MKV and OVS.
通过剪切、弯曲和拉伸试验，测试了热循环和水渗透对树脂-金属系统粘结强度的影响，以及使用粘结剂后的改善情况。在5-37-55摄氏度的不同水浴中于10天内进行10000次循环后，粘结强度下降了40%至60%。使用粘结剂可使树脂与金属的附着力提高100%以上。在三种粘结剂Silicoater、Sebond MKV和OVS之间未发现显著差异。
