Paulus Daniel H, Oehmigen Mark, Grüneisen Johannes, Umutlu Lale, Quick Harald H
Institute of Medical Physics, University of Erlangen-Nürnberg, Erlangen, Germany.
Phys Med Biol. 2016 May 7;61(9):3504-20. doi: 10.1088/0031-9155/61/9/3504. Epub 2016 Apr 7.
Modern radiation therapy (RT) treatment planning is based on multimodality imaging. With the recent availability of whole-body PET/MR hybrid imaging new opportunities arise to improve target volume delineation in RT treatment planning. This, however, requires dedicated RT equipment for reproducible patient positioning on the PET/MR system, which has to be compatible with MR and PET imaging. A prototype flat RT table overlay, radiofrequency (RF) coil holders for head imaging, and RF body bridges for body imaging were developed and tested towards PET/MR system integration. Attenuation correction (AC) of all individual RT components was performed by generating 3D CT-based template models. A custom-built program for μ-map generation assembles all AC templates depending on the presence and position of each RT component. All RT devices were evaluated in phantom experiments with regards to MR and PET imaging compatibility, attenuation correction, PET quantification, and position accuracy. The entire RT setup was then evaluated in a first PET/MR patient study on five patients at different body regions. All tested devices are PET/MR compatible and do not produce visible artifacts or disturb image quality. The RT components showed a repositioning accuracy of better than 2 mm. Photon attenuation of -11.8% in the top part of the phantom was observable, which was reduced to -1.7% with AC using the μ-map generator. Active lesions of 3 subjects were evaluated in terms of SUVmean and an underestimation of -10.0% and -2.4% was calculated without and with AC of the RF body bridges, respectively. The new dedicated RT equipment for hybrid PET/MR imaging enables acquisitions in all body regions. It is compatible with PET/MR imaging and all hardware components can be corrected in hardware AC by using the suggested μ-map generator. These developments provide the technical and methodological basis for integration of PET/MR hybrid imaging into RT planning.
现代放射治疗(RT)治疗计划基于多模态成像。随着全身PET/MR混合成像技术的近期出现,在RT治疗计划中改善靶区勾画有了新的机遇。然而,这需要专门的RT设备,以便在PET/MR系统上实现可重复的患者定位,该设备必须与MR和PET成像兼容。开发并测试了用于PET/MR系统集成的原型平板RT床覆盖物、用于头部成像的射频(RF)线圈固定器以及用于身体成像的RF体桥。通过生成基于3D CT的模板模型,对所有单个RT组件进行衰减校正(AC)。一个用于生成μ图的定制程序根据每个RT组件的存在和位置组装所有AC模板。在体模实验中,对所有RT设备的MR和PET成像兼容性、衰减校正、PET定量和位置精度进行了评估。然后,在对五名不同身体部位患者的首次PET/MR患者研究中,对整个RT设置进行了评估。所有测试设备均与PET/MR兼容,不会产生可见伪影或干扰图像质量。RT组件的重新定位精度优于2毫米。在体模顶部可观察到光子衰减为-11.8%,使用μ图生成器进行AC后,衰减降至-1.7%。对3名受试者的活性病变进行了SUVmean评估,在未对RF体桥进行AC和进行AC时,分别计算出低估率为-10.0%和-2.4%。用于混合PET/MR成像的新型专用RT设备能够在全身各部位进行采集。它与PET/MR成像兼容,并且通过使用建议的μ图生成器,可以在硬件AC中对所有硬件组件进行校正。这些进展为将PET/MR混合成像集成到RT计划中提供了技术和方法基础。