Suppr超能文献

评估AlgerBrush II旋转毛刺作为诱导新西兰白兔眼表损伤工具的效果。

Evaluation of the AlgerBrush II rotating burr as a tool for inducing ocular surface failure in the New Zealand White rabbit.

作者信息

Li Fiona J, Nili Elham, Lau Cora, Richardson Neil A, Walshe Jennifer, Barnett Nigel L, Cronin Brendan G, Hirst Lawrence W, Schwab Ivan R, Chirila Traian V, Harkin Damien G

机构信息

Queensland Eye Institute, 140 Melbourne Street, South Brisbane, Queensland, 4101, Australia.

Queensland Eye Institute, 140 Melbourne Street, South Brisbane, Queensland, 4101, Australia; School of Biomedical Sciences, Faculty of Health, Queensland University of Technology, 2 George Street, Brisbane, Australia; Institute of Health & Biomedical Innovation, Queensland University of Technology, 60 Musk Avenue, Kelvin Grove, Queensland, 4059, Australia.

出版信息

Exp Eye Res. 2016 Jun;147:1-11. doi: 10.1016/j.exer.2016.04.005. Epub 2016 Apr 13.

Abstract

The New Zealand White rabbit has been widely used as a model of limbal stem cell deficiency (LSCD). Current techniques for experimental induction of LSCD utilize caustic chemicals, or organic solvents applied in conjunction with a surgical limbectomy. While generally successful in depleting epithelial progenitors, the depth and severity of injury is difficult to control using chemical-based methods. Moreover, the anterior chamber can be easily perforated while surgically excising the corneal limbus. In the interest of creating a safer and more defined LSCD model, we have therefore evaluated a mechanical debridement technique based upon use of the AlgerBrush II rotating burr. An initial comparison of debridement techniques was conducted in situ using 24 eyes in freshly acquired New Zealand White rabbit cadavers. Techniques for comparison (4 eyes each) included: (1) non-wounded control, (2) surgical limbectomy followed by treatment with 100% (v/v) n-heptanol to remove the corneal epithelium (1-2 min), (3) treatment of both limbus and cornea with n-heptanol alone, (4) treatment of both limbus and cornea with 20% (v/v) ethanol (2-3 min), (5) a 2.5-mm rounded burr applied to both the limbus and cornea, and (6) a 1-mm pointed burr applied to the limbus, followed by the 2.5-mm rounded burr applied to the cornea. All corneas were excised and processed for histology immediately following debridement. A panel of four assessors subsequently scored the degree of epithelial debridement within the cornea and limbus using masked slides. The 2.5-mm burr most consistently removed the corneal and limbal epithelia. Islands of limbal epithelial cells were occasionally retained following surgical limbectomy/heptanol treatment, or use of the 1-mm burr. Limbal epithelial cells were consistently retained following treatment with either ethanol or n-heptanol alone, with ethanol being the least effective treatment overall. The 2.5-mm burr method was subsequently evaluated in the right eye of 3 live rabbits by weekly clinical assessments (photography and slit lamp examination) for up to 5 weeks, followed by histological analyses (hematoxylin & eosin stain, periodic acid-Schiff stain and immunohistochemistry for keratin 3 and 13). All 3 eyes that had been completely debrided using the 2.5-mm burr displayed symptoms of ocular surface failure as defined by retention of a prominent epithelial defect (∼40% of corneal surface at 5 weeks), corneal neovascularization (2-3 quadrants), reduced corneal transparency and conjunctivalization of the corneal surface (demonstrated by the presence of goblet cells and/or staining for keratin 13). In conclusion, our findings indicate that the AlgerBrush II rotating burr is an effective method for the establishment of ocular surface failure in New Zealand White rabbits. In particular, we recommend use of the 2.5-mm rotating burr for improved efficiency of epithelial debridement and safety compared to surgical limbectomy.

摘要

新西兰白兔已被广泛用作角膜缘干细胞缺乏症(LSCD)的模型。目前用于实验性诱导LSCD的技术使用苛性化学物质或与外科肢体切除术联合应用的有机溶剂。虽然这些方法通常能成功耗尽上皮祖细胞,但基于化学方法难以控制损伤的深度和严重程度。此外,在手术切除角膜缘时前房很容易被穿透。因此,为了创建一个更安全、更明确的LSCD模型,我们评估了一种基于使用AlgerBrush II旋转磨头的机械清创技术。最初在刚获取的新西兰白兔尸体上使用24只眼进行原位清创技术比较。比较的技术(每组4只眼)包括:(1)未受伤对照,(2)外科肢体切除术后用100%(v/v)正庚醇处理以去除角膜上皮(1 - 2分钟),(3)仅用正庚醇处理角膜缘和角膜,(4)用20%(v/v)乙醇处理角膜缘和角膜(2 - 3分钟),(5)用2.5毫米圆形磨头处理角膜缘和角膜,(6)先用1毫米尖磨头处理角膜缘,然后用2.5毫米圆形磨头处理角膜。清创后立即切除所有角膜并进行组织学处理。随后由一组四名评估人员使用遮盖玻片对角膜和角膜缘内的上皮清创程度进行评分。2.5毫米磨头最一致地去除了角膜和角膜缘上皮。在外科肢体切除/正庚醇处理或使用1毫米磨头后,偶尔会保留角膜缘上皮细胞岛。单独用乙醇或正庚醇处理后,角膜缘上皮细胞始终会保留,乙醇总体上是效果最差的处理方法。随后通过每周临床评估(摄影和裂隙灯检查)对3只活兔的右眼使用2.5毫米磨头方法进行长达5周的评估,随后进行组织学分析(苏木精和伊红染色、过碘酸 - 希夫染色以及角蛋白3和13的免疫组织化学)。所有使用2.5毫米磨头完全清创的3只眼均表现出眼表衰竭的症状,表现为明显的上皮缺损持续存在(5周时约占角膜表面的40%)、角膜新生血管形成(2 - 3个象限)、角膜透明度降低以及角膜表面结膜化(通过杯状细胞的存在和/或角蛋白13染色证明)。总之,我们的研究结果表明,AlgerBrush II旋转磨头是在新西兰白兔中建立眼表衰竭的有效方法。特别是,与外科肢体切除术相比,我们建议使用2.5毫米旋转磨头以提高上皮清创效率和安全性。

文献AI研究员

20分钟写一篇综述,助力文献阅读效率提升50倍。

立即体验

用中文搜PubMed

大模型驱动的PubMed中文搜索引擎

马上搜索

文档翻译

学术文献翻译模型,支持多种主流文档格式。

立即体验